Department of Chemical Engineering and Environmental Technology, University of Valladolid, Dr. Mergelina s/n, 47011 Valladolid, Spain.
Department of Chemical Engineering and Environmental Technology, University of Valladolid, Dr. Mergelina s/n, 47011 Valladolid, Spain.
Bioresour Technol. 2015 Aug;190:332-8. doi: 10.1016/j.biortech.2015.04.082. Epub 2015 Apr 29.
Sugar beet pulp (SBP) has been investigated as a promising feedstock for ABE fermentation by Clostridium beijerinckii. Although lignin content in SBP is low, a pretreatment is needed to enhance enzymatic hydrolysis and fermentation yields. Autohydrolysis at pH 4 has been selected as the best pretreatment for SBP in terms of sugars release and acetone and butanol production. The best overall sugars release yields from raw SBP ranged from 66.2% to 70.6% for this pretreatment. The highest ABE yield achieved was 0.4g/g (5.1g/L of acetone and 6.6g/L butanol) and 143.2g ABE/kg SBP (62.3g acetone and 80.9g butanol) were obtained when pretreated SBP was enzymatically hydrolyzed at 7.5% (w/w) solid loading. Higher solid loadings (10%) offered higher acetone and butanol titers (5.8g/L of acetone and 7.8g/L butanol). All the experiments were carried out under not-controlling pH conditions reaching about 5.3 in the final samples.
糖用甜菜渣(SBP)已被研究作为一种很有前途的原料,通过凝结芽孢杆菌进行ABE 发酵。尽管 SBP 中的木质素含量较低,但仍需要进行预处理以提高酶解和发酵产率。就糖的释放以及丙酮和丁醇的生产而言,pH 值为 4 的自水解已被选为 SBP 的最佳预处理方法。对于这种预处理,从原始 SBP 中获得的最佳总糖释放产率范围为 66.2%至 70.6%。当预处理的 SBP 在 7.5%(w/w)固载量下进行酶解时,获得的最高 ABE 产率为 0.4g/g(5.1g/L 丙酮和 6.6g/L 丁醇)和 143.2g ABE/kg SBP(62.3g 丙酮和 80.9g 丁醇)。在不控制 pH 值的条件下进行所有实验,最终样品的 pH 值约为 5.3。