Completo A, Fonseca F, Ramos A, Simões J
Department of Mechanical Engineering, University of Aveiro, 3810-193, Aveiro, Portugal.
Department of Orthopaedics, Coimbra University Hospital, 3000-075, Coimbra, Portugal.
Knee Surg Sports Traumatol Arthrosc. 2017 Aug;25(8):2559-2566. doi: 10.1007/s00167-015-3652-2. Epub 2015 May 30.
Bone loss is often encountered in revision total knee arthroplasty. In particular, when the cortex of distal femur is breached, the surgical decision on the reconstructive options to be taken is challenging due to the variety of defects and the lack of data from clinical or experimental studies that can support it. The aim of the present work was to test the hypothesis that for an identical defect and bone condition, each reconstructive technique option has a dissimilar stress and stability behaviour, which may be related to differing longevity of the revision procedure.
Triaxial strain gauges and video extensometer were used to measure distal cortex strains and implant stability in eight reconstructive techniques replicated with synthetic femur under a load of 2030N. To assess the cancellous bone strains, finite element models were developed and validated.
The measured strains showed that the distal cortex is not immune to the different reconstructive techniques, when applied to an identical defect; however, significant differences (P < 0.05) were found only between bone graft and metal augment on the 12-mm larger distal defect. The stem addition improves the stability of all reconstructive techniques; however, significant differences (P = 0.03) were found only on the bone-graft technique.
Cement-fill and metal-augment techniques, applied to the 4-mm smaller defect, are not associated with different structural behaviour, while for the 12-mm larger defect, the metal-augment and bone-graft techniques presented distinct biomechanical effects. These effects, by themselves, may not be sufficient to be associated with a different longevity of the revision procedure among techniques, when the stem is added to the bone-graft technique. These findings, based on independent scientific understanding and advanced prediction tools, can improve the surgical decision-making process, when the peripheral cortex of the distal femur is breached.
在全膝关节置换翻修术中常遇到骨丢失情况。特别是当股骨远端皮质被破坏时,由于存在多种缺损情况且缺乏临床或实验研究数据支持,因此在选择重建方案时手术决策具有挑战性。本研究的目的是验证以下假设:对于相同的缺损和骨状况,每种重建技术方案具有不同的应力和稳定性表现,这可能与翻修手术的不同使用寿命相关。
使用三轴应变片和视频引伸计,在2030N载荷下对用合成股骨复制的8种重建技术中的远端皮质应变和植入物稳定性进行测量。为评估松质骨应变,建立并验证了有限元模型。
测量应变表明,当应用于相同缺损时,远端皮质对不同的重建技术并非免疫;然而,仅在12mm较大的远端缺损中,骨移植和金属增强之间发现了显著差异(P<0.05)。增加柄可提高所有重建技术的稳定性;然而,仅在骨移植技术中发现了显著差异(P = 0.03)。
应用于4mm较小缺损的骨水泥填充和金属增强技术与不同的结构行为无关,而对于12mm较大的缺损,金属增强和骨移植技术呈现出不同的生物力学效应。当在骨移植技术中添加柄时,这些效应本身可能不足以与不同技术之间翻修手术的不同使用寿命相关联。基于独立的科学认识和先进预测工具的这些发现,可在股骨远端外周皮质被破坏时改善手术决策过程。