†Institute of Sports Medicine, Beijing Key Laboratory of Sports Injuries, Peking University Third Hospital, Beijing, China.
ACS Appl Mater Interfaces. 2015 Jul 22;7(28):15294-302. doi: 10.1021/acsami.5b03129. Epub 2015 Jul 13.
Tissue-engineered meniscus offers a possible solution to the regeneration and replacement problem of meniscectomy. However, the nonuniform distribution and declined proliferation of seeded cells on scaffolds hinder the application of tissue-engineered meniscus as a new generation of meniscus graft. This study systematically investigated the performances of different seeding techniques by using the demineralized cancellous bone (DCB) as the scaffold. Static seeding, injection seeding, centrifugal seeding, and vacuum seeding methods were used to seed the meniscal fibrochondrocytes (MFCs) and mesenchymal stem cells (MSCs) to scaffolds. Cell-binding efficiency, survival rate, distribution ability, and long-term proliferation effects on scaffolds were quantitatively evaluated. Cell adhesion was compared via cell-binding kinetics. Cell viability and morphology were assessed by using fluorescence staining. Combined with the reconstructed three-dimensional image, the distribution of seeded cells was investigated. The Cell Counting Kit-8 assay and DNA assay were employed to assess cell proliferation. Cell-binding kinetics and cell survival of the MFCs were improved via centrifugal seeding compared to injection or vacuum seeding methods. Seeded MFCs by centrifugation showed a more homogeneous distribution throughout the scaffold than cells seeded by other methods. Moreover, the penetration depth in the scaffold of seeded MFCs by centrifugation was 300-500 μm, much higher than the value of 100-300 μm by the surface static and injection seeding. The long-term proliferation of the MFCs in the centrifugal group was also significantly higher than that in the other groups. The results of the MSCs were similar to those of the MFCs. The centrifugal seeding method could significantly improve MFCs or MSCs distribution and proliferation on the DCB scaffolds, thus providing a simple, cost-effective, and effective cell-seeding protocol for tissue-engineered meniscus.
组织工程半月板为半月板切除术的再生和替代问题提供了一种可能的解决方案。然而,种子细胞在支架上的不均匀分布和增殖能力下降阻碍了组织工程半月板作为新一代半月板移植物的应用。本研究系统地研究了不同接种技术在脱钙松质骨(DCB)支架上的性能。采用静态接种、注射接种、离心接种和真空接种方法将半月板纤维软骨细胞(MFCs)和间充质干细胞(MSCs)接种到支架上。定量评估了细胞结合效率、存活率、分布能力和对支架的长期增殖效果。通过细胞结合动力学比较细胞黏附。通过荧光染色评估细胞活力和形态。结合重建的三维图像,研究了接种细胞的分布情况。采用细胞计数试剂盒-8 检测法和 DNA 检测法评估细胞增殖。与注射或真空接种方法相比,离心接种可提高 MFCs 的细胞结合动力学和细胞存活率。与其他方法相比,离心接种的 MFCs 在支架中分布更均匀。此外,离心接种的 MFCs 在支架中的穿透深度为 300-500μm,明显高于表面静态和注射接种的 100-300μm。离心组中 MFCs 的长期增殖也明显高于其他组。MSCs 的结果与 MFCs 的结果相似。离心接种法能显著改善 MFCs 或 MSCs 在 DCB 支架上的分布和增殖,为组织工程半月板提供了一种简单、经济有效的细胞接种方案。