Castillo Sarah J, Castillo Richard, Castillo Edward, Pan Tinsu, Ibbott Geoffrey, Balter Peter, Hobbs Brian, Guerrero Thomas
The University of Texas Medical Branch.
J Appl Clin Med Phys. 2015 Mar 8;16(2):4949. doi: 10.1120/jacmp.v16i2.4949.
Four-dimensional computed tomography (4D CT) is used to account for respiratory motion in radiation treatment planning, but artifacts resulting from the acquisition and postprocessing limit its accuracy. We investigated the efficacy of three experimental 4D CT acquisition methods to reduce artifacts in a prospective institutional review board approved study. Eighteen thoracic patients scheduled to undergo radiation therapy received standard clinical 4D CT scans followed by each of the alternative 4D CT acquisitions: 1) data oversampling, 2) beam gating with breathing irregularities, and 3) rescanning the clinical acquisition acquired during irregular breathing. Relative values of a validated correlation-based artifact metric (CM) determined the best acquisition method per patient. Each 4D CT was processed by an extended phase sorting approach that optimizes the quantitative artifact metric (CM sorting). The clinical acquisitions were also postprocessed by phase sorting for artifact comparison of our current clinical implementation with the experimental methods. The oversampling acquisition achieved the lowest artifact presence among all acquisitions, achieving a 27% reduction from the current clinical 4D CT implementation (95% confidence interval = 34-20). The rescan method presented a significantly higher artifact presence from the clinical acquisition (37%; p < 0.002), the gating acquisition (26%; p < 0.005), and the oversampling acquisition (31%; p < 0.001), while the data lacked evidence of a significant difference between the clinical, gating, and oversampling methods. The oversampling acquisition reduced artifact presence from the current clinical 4D CT implementation to the largest degree and provided the simplest and most reproducible implementation. The rescan acquisition increased artifact presence significantly, compared to all acquisitions, and suffered from combination of data from independent scans over which large internal anatomic shifts occurred.
四维计算机断层扫描(4D CT)用于在放射治疗计划中考虑呼吸运动,但采集和后处理产生的伪影限制了其准确性。在一项经机构审查委员会批准的前瞻性研究中,我们研究了三种实验性4D CT采集方法减少伪影的效果。计划接受放射治疗的18例胸部患者先接受标准临床4D CT扫描,然后依次接受每种替代4D CT采集:1)数据过采样,2)带有呼吸不规则的射束门控,以及3)重新扫描在不规则呼吸期间采集的临床图像。基于验证的基于相关性的伪影度量(CM)的相对值确定每位患者的最佳采集方法。每个4D CT通过扩展的相位排序方法进行处理,该方法优化了定量伪影度量(CM排序)。临床采集图像也通过相位排序进行后处理,以便将我们当前的临床实施方案与实验方法进行伪影比较。过采样采集在所有采集中实现了最低的伪影出现率,与当前临床4D CT实施方案相比降低了27%(95%置信区间 = 34 - 20)。重新扫描方法在临床采集(37%;p < 0.002)、门控采集(26%;p < 0.005)和过采样采集(31%;p < 0.001)中呈现出明显更高的伪影出现率,而数据缺乏临床、门控和过采样方法之间存在显著差异的证据。过采样采集在最大程度上降低了当前临床4D CT实施方案中的伪影出现率,并提供了最简单且最可重复的实施方案。与所有采集相比,重新扫描采集显著增加了伪影出现率,并且受到来自独立扫描的数据组合的影响,在这些独立扫描中发生了较大的内部解剖移位。