Uzarski Joseph S, Su Jimmy, Xie Yan, Zhang Zheng J, Ward Heather H, Wandinger-Ness Angela, Miller William M, Wertheim Jason A
Comprehensive Transplant Center, Feinberg School of Medicine, Northwestern University; Department of Surgery, Feinberg School of Medicine, Northwestern University.
Comprehensive Transplant Center, Feinberg School of Medicine, Northwestern University; Department of Surgery, Feinberg School of Medicine, Northwestern University; Department of Biomedical Engineering, Northwestern University; Simpson Querrey Institute for BioNanotechnology in Medicine, Northwestern University.
J Vis Exp. 2015 Aug 10(102):e53271. doi: 10.3791/53271.
This protocol details the generation of acellular, yet biofunctional, renal extracellular matrix (ECM) scaffolds that are useful as small-scale model substrates for organ-scale tissue development. Sprague Dawley rat kidneys are cannulated by inserting a catheter into the renal artery and perfused with a series of low-concentration detergents (Triton X-100 and sodium dodecyl sulfate (SDS)) over 26 hr to derive intact, whole-kidney scaffolds with intact perfusable vasculature, glomeruli, and renal tubules. Following decellularization, the renal scaffold is placed inside a custom-designed perfusion bioreactor vessel, and the catheterized renal artery is connected to a perfusion circuit consisting of: a peristaltic pump; tubing; and optional probes for pH, dissolved oxygen, and pressure. After sterilizing the scaffold with peracetic acid and ethanol, and balancing the pH (7.4), the kidney scaffold is prepared for seeding via perfusion of culture medium within a large-capacity incubator maintained at 37 °C and 5% CO2. Forty million renal cortical tubular epithelial (RCTE) cells are injected through the renal artery, and rapidly perfused through the scaffold under high flow (25 ml/min) and pressure (~230 mmHg) for 15 min before reducing the flow to a physiological rate (4 ml/min). RCTE cells primarily populate the tubular ECM niche within the renal cortex, proliferate, and form tubular epithelial structures over seven days of perfusion culture. A 44 µM resazurin solution in culture medium is perfused through the kidney for 1 hr during medium exchanges to provide a fluorometric, redox-based metabolic assessment of cell viability and proliferation during tubulogenesis. The kidney perfusion bioreactor permits non-invasive sampling of medium for biochemical assessment, and multiple inlet ports allow alternative retrograde seeding through the renal vein or ureter. These protocols can be used to recellularize kidney scaffolds with a variety of cell types, including vascular endothelial, tubular epithelial, and stromal fibroblasts, for rapid evaluation within this system.
本方案详细介绍了无细胞但具有生物功能的肾细胞外基质(ECM)支架的生成方法,该支架可用作器官尺度组织发育的小规模模型底物。通过将导管插入肾动脉对Sprague Dawley大鼠肾脏进行插管,并在26小时内用一系列低浓度去污剂(Triton X-100和十二烷基硫酸钠(SDS))灌注,以获得具有完整可灌注血管、肾小球和肾小管的完整全肾支架。脱细胞后,将肾支架置于定制设计的灌注生物反应器容器内,将插管的肾动脉连接到由以下部分组成的灌注回路:蠕动泵、 tubing和用于pH、溶解氧和压力的可选探头。在用过氧乙酸和乙醇对支架进行消毒并平衡pH值(7.4)后,将肾支架准备好用于接种,方法是在保持在37°C和5% CO2的大容量培养箱内通过灌注培养基。四千万个肾皮质肾小管上皮(RCTE)细胞通过肾动脉注入,并在高流量(25 ml/min)和压力(约230 mmHg)下快速通过支架灌注15分钟,然后将流量降至生理速率(4 ml/min)。RCTE细胞主要聚集在肾皮质内的管状ECM微环境中,增殖并在灌注培养的七天内形成管状上皮结构。在更换培养基期间,将44 µM的刃天青溶液通过肾脏灌注1小时,以提供基于荧光、氧化还原的代谢评估,以评估肾小管形成过程中细胞活力和增殖情况。肾灌注生物反应器允许对培养基进行非侵入性采样以进行生化评估,多个入口端口允许通过肾静脉或输尿管进行替代性逆行接种。这些方案可用于用多种细胞类型(包括血管内皮细胞、肾小管上皮细胞和基质成纤维细胞)对肾支架进行再细胞化,以便在该系统内进行快速评估。