Karlsruhe Institute of Technology (KIT) , Institute of Organic Chemistry, Fritz-Haber-Weg 6, 76131 Karlsruhe, Germany.
Acc Chem Res. 2015 Oct 20;48(10):2724-33. doi: 10.1021/acs.accounts.5b00314. Epub 2015 Sep 28.
Light-harvesting complexes collect light energy and deliver it by a cascade of energy and electron transfer processes to the reaction center where charge separation leads to storage as chemical energy. The design of artificial light-harvesting assemblies faces enormous challenges because several antenna chromophores need to be kept in close proximity but self-quenching needs to be avoided. Double stranded DNA as a supramolecular scaffold plays a promising role due to its characteristic structural properties. Automated DNA synthesis allows incorporation of artificial chromophore-modified building blocks, and sequence design allows precise control of the distances and orientations between the chromophores. The helical twist between the chromophores, which is induced by the DNA framework, controls energy and electron transfer and thereby reduces the self-quenching that is typically observed in chromophore aggregates. This Account summarizes covalently multichromophore-modified DNA and describes how such multichromophore arrays were achieved by Watson-Crick-specific and DNA-templated self-assembly. The covalent DNA systems were prepared by incorporation of chromophores as DNA base substitutions (either as C-nucleosides or with acyclic linkers as substitutes for the 2'-deoxyribofuranoside) and as DNA base modifications. Studies with DNA base substitutions revealed that distances but more importantly relative orientations of the chromophores govern the energy transfer efficiencies and thereby the light-harvesting properties. With DNA base substitutions, duplex stabilization was faced and could be overcome, for instance, by zipper-like placement of the chromophores in both strands. For both principal structural approaches, DNA-based light-harvesting antenna could be realized. The major disadvantages, however, for covalent multichromophore DNA conjugates are the poor yields of synthesis and the solubility issues for oligonucleotides with more than 5-10 chromophore modifications in a row. A logical alternative approach is to leave out the phosphodiester bridges between the chromophores and let chromophore-nucleoside conjugates self-assemble specifically along single stranded DNA as template. The self-organization of chromophores along the DNA template based on canonical base pairing would be advantageous because sequence selective base pairing could provide a structural basis for programmed complexity within the chromophore assembly. The self-assembly is governed by two interactions. The chromophore-nucleoside conjugates as guest molecules are recognized via hydrogen bonds to the corresponding counter bases in the single stranded DNA template. Moreover, the π-π interactions between the stacked chromophores stabilize these self-assembled constructs with increasing length. Longer DNA templates are more attractive for self-assembled antenna. The helicity in the stack of porphyrins as guest molecules assembled on the DNA template can be switched by environmental changes, such as pH variations. DNA-templated stacks of ethynyl pyrene and nile red exhibit left-handed chirality, which stands in contrast to similar covalent multichromophore-DNA conjugates with enforced right-handed helicity. With ethynyl nile red, it is possible to occupy every available binding site on the templates. Mixed assemblies of ethynyl pyrene and nile red show energy transfer and thereby provide a proof-of-principle that simple light-harvesting antennae can be obtained in a noncovalent and self-assembled fashion. With respect to the next important step, chemical storage of the absorbed light energy, future research has to focus on the coupling of sophisticated DNA-based light-harvesting antenna to reaction centers.
光捕获复合物收集光能,并通过能量和电子转移过程的级联将其传递到反应中心,在那里电荷分离导致化学能的存储。人工光捕获组件的设计面临着巨大的挑战,因为需要将几个天线发色团保持在近距离,但需要避免自猝灭。双链 DNA 作为超分子支架由于其特征结构性质而具有很大的应用前景。自动化 DNA 合成允许掺入人工发色团修饰的构建块,并且序列设计允许对发色团之间的距离和取向进行精确控制。发色团之间的螺旋扭曲由 DNA 框架诱导,控制能量和电子转移,从而减少通常在发色团聚集体中观察到的自猝灭。本账户总结了共价多色团修饰的 DNA,并描述了如何通过 Watson-Crick 特异性和 DNA 模板自组装来实现这种多色团阵列。共价 DNA 系统是通过将发色团作为 DNA 碱基取代(无论是 C-核苷还是环状接头作为 2'-脱氧核糖呋喃糖的替代品)和作为 DNA 碱基修饰来制备的。对 DNA 碱基取代的研究表明,发色团的距离但更重要的是相对取向控制着能量转移效率,从而控制着光捕获性能。通过 DNA 碱基取代,需要面对双链体稳定化的问题,例如可以通过将发色团以拉链状放置在两条链上来克服这个问题。对于这两种主要的结构方法,都可以实现基于 DNA 的光捕获天线。然而,对于共价多色团 DNA 缀合物,主要的缺点是合成产率差,以及具有 5-10 个以上发色团修饰的寡核苷酸的溶解性问题。一个合乎逻辑的替代方法是省略发色团之间的磷酸二酯桥,并让发色团-核苷缀合物沿着单链 DNA 作为模板特异性地自组装。基于规范碱基配对的沿 DNA 模板的发色团自组织将是有利的,因为序列选择性碱基配对可以为发色团组装中的程序化复杂性提供结构基础。自组装由两种相互作用控制。作为客体分子的发色团-核苷缀合物通过氢键识别与单链 DNA 模板中相应的反碱基。此外,堆叠的发色团之间的 π-π 相互作用稳定了这些自组装结构,随着长度的增加而增加。更长的 DNA 模板更适合自组装天线。组装在 DNA 模板上的卟啉作为客体分子的堆叠中的螺旋性可以通过环境变化(例如 pH 值变化)来切换。在 DNA 模板上组装的乙炔基芘和尼罗红的堆叠表现出左手手性,这与具有强制右手螺旋性的类似共价多色团-DNA 缀合物形成对比。对于乙炔基尼罗红,可以占据模板上的每个可用结合位点。乙炔基芘和尼罗红的混合组装显示出能量转移,从而提供了一个简单的光捕获天线可以以非共价和自组装的方式获得的原理证明。关于下一步的重要步骤,即化学存储吸收的光能,未来的研究必须集中在将复杂的基于 DNA 的光捕获天线与反应中心耦合上。