Sinthuchai Donwichai, Boontanon Suwanna Kitpati, Boontanon Narin, Polprasert Chongrak
Department of Civil and Environmental Engineering, Faculty of Engineering, Mahidol University, 25/25 Phutthamonthon 4 Rd, Salaya, Phutthamonthon, Nakhon Pathom 73170, Thailand E-mail:
Faculty of Environment and Resource Studies, Mahidol University, 999 Phutthamonthon 4 Rd, Salaya, Phutthamonthon, Nakhon Pathom 73170, Thailand.
Water Sci Technol. 2016;73(1):182-91. doi: 10.2166/wst.2015.484.
This study aimed to investigate the antibiotic concentration at each stage of treatment and to evaluate the removal efficiency of antibiotics in different types of secondary and advanced treatment, as well as the effects of the location of their discharge points on the occurrence of antibiotics in surface water. Eight target antibiotics and four hospital wastewater treatment plants in Bangkok with different conventional and advanced treatment options were investigated. Antibiotics were extracted by solid phase extraction and analysed by high performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS). The antibiotic with the highest concentration at influent was cefazolin at 13,166 ng/L, while the antibiotic with the highest concentration at effluent was sulfamethoxazole at 1,499 ng/L. The removal efficiency of antibiotics from lowest to highest was sulfamethoxazole, piperacillin, clarithromycin, metronidazole, dicloxacillin, ciprofloxacin, cefazolin, and cefalexin. The adopted conventional treatment systems could not completely remove all antibiotics from wastewater. However, using advanced treatments or disinfection units such as chlorination and UV could increase the antibiotic removal efficiency. Chlorination was more effective than UV, ciprofloxacin and sulfamethoxazole concentration fluctuated during the treatment process, and sulfamethoxazole was the most difficult to remove. Both these antibiotics should be studied further regarding their contamination in sludge and suitable treatment options for their removal.
本研究旨在调查治疗各阶段的抗生素浓度,评估不同类型二级和深度处理中抗生素的去除效率,以及排放点位置对地表水中抗生素出现情况的影响。对曼谷的8种目标抗生素和4家采用不同常规和深度处理方案的医院污水处理厂进行了调查。抗生素通过固相萃取提取,并用高效液相色谱 - 串联质谱法(HPLC - MS/MS)进行分析。进水浓度最高的抗生素是头孢唑林,为13,166 ng/L,而出水浓度最高的抗生素是磺胺甲恶唑,为1,499 ng/L。抗生素去除效率从低到高依次为磺胺甲恶唑、哌拉西林、克拉霉素、甲硝唑、双氯西林、环丙沙星、头孢唑林和头孢氨苄。所采用的常规处理系统无法完全去除废水中的所有抗生素。然而,使用深度处理或消毒单元(如氯化和紫外线)可以提高抗生素去除效率。氯化比紫外线更有效,环丙沙星和磺胺甲恶唑浓度在处理过程中波动,磺胺甲恶唑最难去除。对于这两种抗生素在污泥中的污染情况以及去除它们的合适处理方案,都应进一步研究。