Li Hu, Daukiya Lakshya, Haldar Soumyajyoti, Lindblad Andreas, Sanyal Biplab, Eriksson Olle, Aubel Dominique, Hajjar-Garreau Samar, Simon Laurent, Leifer Klaus
Department of Engineering Sciences, Ångström Laboratory, Uppsala University, Sweden.
Institut de Sciences des Matériaux de Mulhouse, UMR 7361-CNRS, UHA, France.
Sci Rep. 2016 Jan 29;6:19719. doi: 10.1038/srep19719.
The functionalization of graphene remains an important challenge for numerous applications expected by this fascinating material. To keep advantageous properties of graphene after modification or functionalization of its structure, local approaches are a promising road. A novel technique is reported here that allows precise site-selective fluorination of graphene. The basic idea of this approach consists in the local radicalization of graphene by focused ion beam (FIB) irradiation and simultaneous introduction of XeF2 gas. A systematic series of experiments were carried out to outline the relation between inserted defect creation and the fluorination process. Based on a subsequent X-ray photoelectron spectroscopy (XPS) analysis, a 6-fold increase of the fluorine concentration on graphene under simultaneous irradiation was observed when compared to fluorination under normal conditions. The fluorine atoms are predominately localized at the defects as indicated from scanning tunneling microscopy (STM). The experimental findings are confirmed by density functional theory which predicts a strong increase of the binding energy of fluorine atoms when bound to the defect sites. The developed technique allows for local fluorination of graphene without using resists and has potential to be a general enabler of site-selective functionalization of graphene using a wide range of gases.
对于这种迷人材料所期望的众多应用而言,石墨烯的功能化仍然是一项重大挑战。为了在石墨烯结构改性或功能化后保持其有利特性,局部方法是一条很有前景的途径。本文报道了一种新颖的技术,该技术能够实现石墨烯的精确位点选择性氟化。这种方法的基本思路是通过聚焦离子束(FIB)辐照使石墨烯局部产生自由基,并同时引入XeF2气体。开展了一系列系统实验,以勾勒出插入缺陷的产生与氟化过程之间的关系。基于随后的X射线光电子能谱(XPS)分析,与正常条件下的氟化相比,同时辐照时石墨烯上的氟浓度增加了6倍。扫描隧道显微镜(STM)表明,氟原子主要位于缺陷处。密度泛函理论证实了实验结果,该理论预测氟原子与缺陷位点结合时结合能会大幅增加。所开发的技术无需使用抗蚀剂就能实现石墨烯的局部氟化,并且有潜力成为使用多种气体对石墨烯进行位点选择性功能化的通用方法。