DTU-NANOTECH, Department of Micro and Nanotechnology, Technical University of Denmark, DTU Building 423, DK-2800 Kongens Lyngby, Denmark.
School of Electronics and Computer Science, University of Southampton, Southampton SO17 1BJ, UK.
Diagnostics (Basel). 2012 Nov 29;2(4):72-82. doi: 10.3390/diagnostics2040072.
SU-8 epoxy-based negative photoresist has been extensively employed as a structural material for fabrication of numerous biological microelectro-mechanical systems (Bio-MEMS) or lab-on-a-chip (LOC) devices. However, SU-8 has a high autofluorescence level that limits sensitivity of microdevices that use fluorescence as the predominant detection workhorse. Here, we show that deposition of a thin gold nanoparticles layer onto the SU-8 surface significantly reduces the autofluorescence of the coated SU-8 surface by as much as 81% compared to bare SU-8. Furthermore, DNA probes can easily be immobilized on the Au surface with high thermal stability. These improvements enabled sensitive DNA detection by simple DNA hybridization down to 1 nM (a two orders of magnitude improvement) or by solid-phase PCR with sub-picomolar sensitivity. The approach is simple and easy to perform, making it suitable for various Bio-MEMs and LOC devices that use SU-8 as a structural material.
SU-8 环氧树脂基负性光刻胶已被广泛用作制造众多生物微机电系统(Bio-MEMS)或片上实验室(LOC)器件的结构材料。然而,SU-8 的自发荧光水平较高,限制了使用荧光作为主要检测手段的微器件的灵敏度。在这里,我们表明,在 SU-8 表面沉积一层薄的金纳米粒子层,与裸露的 SU-8 相比,涂层 SU-8 表面的自发荧光可降低多达 81%。此外,DNA 探针可以很容易地固定在 Au 表面上,具有很高的热稳定性。这些改进使得通过简单的 DNA 杂交(灵敏度提高两个数量级)或固相 PCR(灵敏度达到皮摩尔以下)进行敏感的 DNA 检测成为可能。该方法简单易用,适用于各种使用 SU-8 作为结构材料的 Bio-MEMS 和 LOC 器件。