Department of Chemistry, Faculty of Science, Vali-e-Asr University of Rafsanjan, 77188-97111, Iran.
Department of Chemistry, Faculty of Science, Vali-e-Asr University of Rafsanjan, 77188-97111, Iran.
Biosens Bioelectron. 2016 Nov 15;85:828-836. doi: 10.1016/j.bios.2016.06.012. Epub 2016 Jun 7.
A sensitive aptasensor based on a robust nanocomposite of titanium dioxide nanoparticles, multiwalled carbon nanotubes (MWCNT), chitosan and a novel synthesized Schiff base (SB) (TiO2/MWCNT/CHIT/SB) on the surface of a glassy carbon electrode (GCE) was developed for thrombin detection. The resultant nanocomposite can provide a large surface area, excellent electrocatalytic activity, and high stability, which would improve immobilization sites for biological molecules, allow remarkable amplification of the electrochemical signal and contribute to improved sensitivity. Thrombin aptamers were simply immobilized onto the TiO2-MWCNT/CHIT-SB nanocomposite matrix through simple π - π stacking and electrostatic interactions between CHIT/SB and aptamer strands. The electrochemical impedance spectroscopy (EIS), cyclic voltammetry (CV) and differential pulse voltammetry (DPV) were used to analyze the surface characterization of unmodified GCE and TiO2-MWCNT/CHIT-SB modified GCE, and also the interaction between aptamer and thrombin. In the presence of thrombin, the aptamer on the adsorbent layer captures the target on the electrode interface, which makes a barrier for electrons and inhibits electron transfer, thereby resulting in decreased DPV and increased impedance signals of the TiO2-MWCNT/CHIT-SB modified GCE. Furthermore, the proposed aptasensor has a very low LOD of 1.0fmolL(-1) thrombin within the detection range of 0.00005-10nmolL(-1). The aptasensor also presents high specificity and reproducibility for thrombin, which is unaffected by the coexistence of other proteins. Clinical application was performed with analysis of the thrombin levels in blood and CSF samples obtained from patients with MS, Parkinson, Epilepsy and Polyneuropathy using both the aptasensor and commercial ELISA kit. The results revealed the proposed system to be a promising candidate for clinical analysis of thrombin.
基于二氧化钛纳米粒子、多壁碳纳米管(MWCNT)、壳聚糖和一种新型合成席夫碱(SB)的坚固纳米复合材料(TiO2/MWCNT/CHIT/SB)在玻碳电极(GCE)表面上开发了一种灵敏的适体传感器,用于检测凝血酶。所得纳米复合材料可以提供大的表面积、优异的电催化活性和高稳定性,这将改善生物分子的固定化位点,允许显著放大电化学信号,并有助于提高灵敏度。凝血酶适体通过 CHIT/SB 和适体链之间的简单π-π堆积和静电相互作用简单地固定在 TiO2-MWCNT/CHIT-SB 纳米复合材料基质上。电化学阻抗谱(EIS)、循环伏安法(CV)和差分脉冲伏安法(DPV)用于分析未修饰的 GCE 和 TiO2-MWCNT/CHIT-SB 修饰的 GCE 的表面特征,以及适体与凝血酶之间的相互作用。在存在凝血酶的情况下,吸附剂层上的适体捕获电极界面上的靶标,这使得电子转移受阻,从而导致 DPV 降低和 TiO2-MWCNT/CHIT-SB 修饰的 GCE 的阻抗信号增加。此外,该适体传感器具有非常低的 LOD(1.0fmolL(-1))凝血酶检测范围为 0.00005-10nmolL(-1)。该适体传感器对凝血酶也具有很高的特异性和重现性,不受其他蛋白质共存的影响。使用适体传感器和商业 ELISA 试剂盒对来自多发性硬化症、帕金森病、癫痫和多发性神经病患者的血液和 CSF 样本中的凝血酶水平进行了临床应用。结果表明,该系统是凝血酶临床分析的有前途的候选者。