Poole Kenneth E S, Skingle Linda, Gee Andrew H, Turmezei Thomas D, Johannesdottir Fjola, Blesic Karen, Rose Collette, Vindlacheruvu Madhavi, Donell Simon, Vaculik Jan, Dungl Pavel, Horak Martin, Stepan Jan J, Reeve Jonathan, Treece Graham M
Department of Medicine, University of Cambridge and Addenbrooke's Hospital, Hills Road, Cambridge, UK.
Department of Medicine, University of Cambridge and Addenbrooke's Hospital, Hills Road, Cambridge, UK.
Bone. 2017 Jan;94:124-134. doi: 10.1016/j.bone.2016.10.020. Epub 2016 Oct 21.
Hip fractures are mainly caused by accidental falls and trips, which magnify forces in well-defined areas of the proximal femur. Unfortunately, the same areas are at risk of rapid bone loss with ageing, since they are relatively stress-shielded during walking and sitting. Focal osteoporosis in those areas may contribute to fracture, and targeted 3D measurements might enhance hip fracture prediction. In the FEMCO case-control clinical study, Cortical Bone Mapping (CBM) was applied to clinical computed tomography (CT) scans to define 3D cortical and trabecular bone defects in patients with acute hip fracture compared to controls. Direct measurements of trabecular bone volume were then made in biopsies of target regions removed at operation.
The sample consisted of CT scans from 313 female and 40 male volunteers (158 with proximal femoral fracture, 145 age-matched controls and 50 fallers without hip fracture). Detailed Cortical Bone Maps (c.5580 measurement points on the unfractured hip) were created before registering each hip to an average femur shape to facilitate statistical parametric mapping (SPM). Areas where cortical and trabecular bone differed from controls were visualised in 3D for location, magnitude and statistical significance. Measures from the novel regions created by the SPM process were then tested for their ability to classify fracture versus control by comparison with traditional CT measures of areal Bone Mineral Density (aBMD). In women we used the surgical classification of fracture location ('femoral neck' or 'trochanteric') to discover whether focal osteoporosis was specific to fracture type. To explore whether the focal areas were osteoporotic by histological criteria, we used micro CT to measure trabecular bone parameters in targeted biopsies taken from the femoral heads of 14 cases.
Hip fracture patients had distinct patterns of focal osteoporosis that determined fracture type, and CBM measures classified fracture type better than aBMD parameters. CBM measures however improved only minimally on aBMD for predicting any hip fracture and depended on the inclusion of trabecular bone measures alongside cortical regions. Focal osteoporosis was confirmed on biopsy as reduced sub-cortical trabecular bone volume.
Using 3D imaging methods and targeted bone biopsy, we discovered focal osteoporosis affecting trabecular and cortical bone of the proximal femur, among men and women with hip fracture.
髋部骨折主要由意外跌倒和绊倒引起,这会增大股骨近端特定区域的受力。不幸的是,随着年龄增长,这些相同区域存在快速骨质流失的风险,因为在行走和坐着时它们相对处于应力屏蔽状态。这些区域的局灶性骨质疏松可能导致骨折,而针对性的三维测量可能会增强髋部骨折的预测能力。在FEMCO病例对照临床研究中,将皮质骨映射(CBM)应用于临床计算机断层扫描(CT),以确定急性髋部骨折患者与对照组相比的三维皮质骨和小梁骨缺损。然后在手术中切除的目标区域活检中直接测量小梁骨体积。
样本包括313名女性和40名男性志愿者的CT扫描(158例股骨近端骨折患者、145名年龄匹配的对照组和50名无髋部骨折的跌倒者)。在将每个髋关节注册到平均股骨形状之前,创建详细的皮质骨图(未骨折髋关节上约5580个测量点),以促进统计参数映射(SPM)。皮质骨和小梁骨与对照组不同的区域以三维形式显示其位置、大小和统计学意义。然后通过与传统的面积骨密度(aBMD)CT测量值比较,测试SPM过程创建的新区域的测量值对骨折与对照进行分类的能力。在女性中,我们使用骨折位置的手术分类(“股骨颈”或“转子间”)来发现局灶性骨质疏松是否特定于骨折类型。为了通过组织学标准探索这些局灶区域是否为骨质疏松,我们使用微型CT测量了14例患者股骨头靶向活检中的小梁骨参数。
髋部骨折患者有决定骨折类型的独特局灶性骨质疏松模式,CBM测量对骨折类型的分类优于aBMD参数。然而,CBM测量在预测任何髋部骨折方面仅比aBMD略有改善,并且依赖于将小梁骨测量与皮质区域一起纳入。活检证实局灶性骨质疏松为皮质下小梁骨体积减少。
通过使用三维成像方法和靶向骨活检,我们在髋部骨折的男性和女性中发现了影响股骨近端小梁骨和皮质骨的局灶性骨质疏松。