Department of Mechanical Engineering, Tufts University, 200 College Ave., Medford, MA 02155, USA.
Nanoscale. 2017 Apr 13;9(15):4881-4890. doi: 10.1039/c6nr08976c.
We report on a novel approach to synthesize ultrabright fluorescent silica particles capable of producing a large number of complex spectra. The spectra can be excited using a single wavelength which is paramount in quantitative fluorescence imaging, flow cytometry and sensing applications. The approach employs the physical encapsulation of organic fluorescent molecules inside a nanoporous silica matrix with no dye leakage. As was recently demonstrated, such an encapsulation allowed for the encapsulation of very high concentrations of organic dyes without quenching their fluorescent efficiency. As a result, dye molecules are distanced within ∼5 nm from each other; it theoretically allows for efficient exchange of excitation energy via Förster resonance energy transfer (FRET). Here we present the first experimental demonstration of the encapsulation of fluorescent dyes in the FRET sequence. Attaining a FRET sequence of up to five different dyes is presented. The number of distinguishable spectra can be further increased by using different relative concentrations of encapsulated dyes. Combining these approaches allows for creating a large number of ultrabright fluorescent particles with substantially different fluorescence spectra. We also demonstrate the utilization of these particles for potential multiplexing applications. Though fluorescence spectra of the obtained multiplex probes are typically overlapping, they can be distinguished by using standard linear decomposition algorithms.
我们报告了一种新颖的方法来合成超亮荧光硅颗粒,这种颗粒能够产生大量复杂的光谱。这种光谱可以使用单个波长激发,这在定量荧光成像、流式细胞术和传感应用中是至关重要的。该方法采用将有机荧光分子物理封装在纳米多孔硅基质内的方法,而不会发生染料泄漏。正如最近所证明的,这种封装方法允许在不猝灭其荧光效率的情况下封装非常高浓度的有机染料。结果,染料分子彼此之间的距离约为 5nm;从理论上讲,这允许通过Förster 共振能量转移(FRET)有效地交换激发能量。在这里,我们首次展示了在 FRET 序列中封装荧光染料的实验演示。我们展示了多达五种不同染料的 FRET 序列。通过使用不同浓度的封装染料,可以进一步增加可分辨光谱的数量。结合这些方法,可以创建具有大量不同荧光光谱的大量超亮荧光颗粒。我们还展示了这些颗粒在潜在的多重检测应用中的利用。尽管获得的多色探针的荧光光谱通常是重叠的,但可以使用标准线性分解算法将它们区分开来。