Suppr超能文献

去除软骨下皮质骨能否为治疗凸轮型股骨髋臼撞击症提供足够的切除深度?

Does Removal of Subchondral Cortical Bone Provide Sufficient Resection Depth for Treatment of Cam Femoroacetabular Impingement?

作者信息

Atkins Penny R, Aoki Stephen K, Whitaker Ross T, Weiss Jeffrey A, Peters Christopher L, Anderson Andrew E

机构信息

Department of Orthopaedics, University of Utah, 590 Wakara Way, Room A100, Salt Lake City, UT, 84108, USA.

Department of Bioengineering, University of Utah, Salt Lake City, UT, USA.

出版信息

Clin Orthop Relat Res. 2017 Aug;475(8):1977-1986. doi: 10.1007/s11999-017-5326-5. Epub 2017 Mar 24.

Abstract

BACKGROUND

Residual impingement resulting from insufficient resection of bone during the index femoroplasty is the most-common reason for revision surgery in patients with cam-type femoroacetabular impingement (FAI). Development of surgical resection guidelines therefore could reduce the number of patients with persistent pain and reduced ROM after femoroplasty.

QUESTIONS/PURPOSES: We asked whether removal of subchondral cortical bone in the region of the lesion in patients with cam FAI could restore femoral anatomy to that of screened control subjects. To evaluate this, we analyzed shape models between: (1) native cam and screened control femurs to observe the location of the cam lesion and establish baseline shape differences between groups, and (2) cam femurs with simulated resections and screened control femurs to evaluate the sufficiency of subchondral cortical bone thickness to guide resection depth.

METHODS

Three-dimensional (3-D) reconstructions of the inner and outer cortical bone boundaries of the proximal femur were generated by segmenting CT images from 45 control subjects (29 males; 15 living subjects, 30 cadavers) with normal radiographic findings and 28 nonconsecutive patients (26 males) with a diagnosis of cam FAI based on radiographic measurements and clinical examinations. Correspondence particles were placed on each femur and statistical shape modeling (SSM) was used to create mean shapes for each cohort. The geometric difference between the mean shape of the patients with cam FAI and that of the screened controls was used to define a consistent region representing the cam lesion. Subchondral cortical bone in this region was removed from the 3-D reconstructions of each cam femur to create a simulated resection. SSM was repeated to determine if the resection produced femoral anatomy that better resembled that of control subjects. Correspondence particle locations were used to generate mean femur shapes and evaluate shape differences using principal component analysis.

RESULTS

In the region of the cam lesion, the median distance between the mean native cam and control femurs was 1.8 mm (range, 1.0-2.7 mm). This difference was reduced to 0.2 mm (range, -0.2 to 0.9 mm) after resection, with some areas of overresection anteriorly and underresection superiorly. In the region of resection for each subject, the distance from each correspondence particle to the mean control shape was greater for the cam femurs than the screened control femurs (1.8 mm, [range, 1.1-2.9 mm] and 0.0 mm [range, -0.2-0.1 mm], respectively; p < 0.031). After resection, the distance was not different between the resected cam and control femurs (0.3 mm; range, -0.2-1.0; p > 0.473).

CONCLUSIONS

Removal of subchondral cortical bone in the region of resection reduced the deviation between the mean resected cam and control femurs to within a millimeter, which resulted in no difference in shape between patients with cam FAI and control subjects. Collectively, our results support the use of the subchondral cortical-cancellous bone margin as a visual intraoperative guide to limit resection depth in the correction of cam FAI.

CLINICAL RELEVANCE

Use of the subchondral cortical-cancellous bone boundary may provide a method to guide the depth of resection during arthroscopic surgery, which can be observed intraoperatively without advanced tooling, or imaging.

摘要

背景

初次股骨成形术期间骨切除不足导致的残余撞击是凸轮型股骨髋臼撞击症(FAI)患者翻修手术最常见的原因。因此,制定手术切除指南可以减少股骨成形术后持续疼痛和活动范围减小的患者数量。

问题/目的:我们探讨了在凸轮型FAI患者的病变区域去除软骨下皮质骨是否能使股骨解剖结构恢复到筛查对照受试者的水平。为评估这一点,我们分析了以下两组之间的形状模型:(1)天然凸轮股骨与筛查对照股骨,以观察凸轮病变的位置并确定两组之间的基线形状差异;(2)模拟切除后的凸轮股骨与筛查对照股骨,以评估软骨下皮质骨厚度指导切除深度的充分性。

方法

通过对45名(29名男性;15名活体受试者,30具尸体)影像学表现正常的对照受试者以及28名(26名男性)经影像学测量和临床检查诊断为凸轮型FAI的非连续患者的CT图像进行分割,生成近端股骨内外皮质骨边界的三维(3-D)重建。在每根股骨上放置对应粒子,并使用统计形状建模(SSM)为每个队列创建平均形状。凸轮型FAI患者的平均形状与筛查对照受试者的平均形状之间的几何差异用于定义代表凸轮病变的一致区域。从每个凸轮股骨的3-D重建中去除该区域的软骨下皮质骨,以创建模拟切除。重复SSM以确定切除后的股骨解剖结构是否更类似于对照受试者。使用对应粒子位置生成平均股骨形状,并使用主成分分析评估形状差异。

结果

在凸轮病变区域,天然凸轮股骨与对照股骨平均形状之间的中位数距离为1.8毫米(范围为1.0 - 2.7毫米)。切除后,该差异减小至0.2毫米(范围为 - 0.2至0.9毫米),前部有一些切除过多区域,上部有切除不足区域。在每个受试者的切除区域,凸轮股骨上每个对应粒子到平均对照形状的距离大于筛查对照股骨(分别为1.8毫米,[范围为1.1 - 2.9毫米]和0.0毫米[范围为 - 0.2 - 0.1毫米];p < 0.031)。切除后,切除后的凸轮股骨与对照股骨之间的距离无差异(0.3毫米;范围为 - 0.2 - 1.0;p > 0.473)。

结论

在切除区域去除软骨下皮质骨可将切除后的凸轮股骨与对照股骨平均形状之间的偏差减小到一毫米以内,这使得凸轮型FAI患者与对照受试者之间的形状无差异。总体而言,我们的结果支持将软骨下皮质 - 松质骨边缘用作术中视觉指南,以限制凸轮型FAI矫正术中的切除深度。

临床意义

使用软骨下皮质 - 松质骨边界可为关节镜手术期间的切除深度提供一种指导方法,术中无需先进工具或成像即可观察到。

相似文献

6
Statistical shape modeling of cam femoroacetabular impingement.凸轮型股骨髋臼撞击症的统计形状建模。
J Orthop Res. 2013 Oct;31(10):1620-6. doi: 10.1002/jor.22389. Epub 2013 Jul 7.

引用本文的文献

5
Advances in FAI Imaging: a Focused Review.FAI成像的进展:聚焦综述。
Curr Rev Musculoskelet Med. 2020 Oct;13(5):622-640. doi: 10.1007/s12178-020-09663-7.

本文引用的文献

10
Statistical shape modeling of cam femoroacetabular impingement.凸轮型股骨髋臼撞击症的统计形状建模。
J Orthop Res. 2013 Oct;31(10):1620-6. doi: 10.1002/jor.22389. Epub 2013 Jul 7.

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验