Department of Electrical and Computer Engineering, University of Rochester, Rochester, NY, 14627, USA.
Department of Neurology, School of Medicine and Dentistry, University of Rochester Medical Center, Rochester, NY, 14622, USA.
Med Phys. 2017 Aug;44(8):4068-4082. doi: 10.1002/mp.12329. Epub 2017 Jun 30.
Vascular elastography can visualize the strain distribution in the carotid artery, which could be useful in assessing the propensity of advanced plaques to rupture. In our previous studies, we demonstrated that sparse synthetic aperture (SA) imaging can produce high quality vascular strain elastograms. However, the low output power of SA imaging may hamper its clinical utility. In this study, we hypothesize that multi-element defocused emissions can overcome this limitation and improve the quality of the vascular strain elastograms.
To assess the impact of attenuation on the elastographic performance of SA and (multi-element synthetic aperture) MSA imaging, we conducted experiments using heterogeneous vessel phantoms with ideal (0.1 dB cm MHz ) and realistic (0.75 dB cm MHz ) attenuation. Further, we validated the results of the phantom study in vivo, on a healthy male volunteer. All echo imaging was performed at a transmit frequency of 5 MHz, using a commercially available ultrasound scanner (Sonix RP, Ultrasonix Medical Corp., Richmond, BC, Canada).
The results from the phantom results demonstrated that plaques were visible in all strain elastograms, but those produced using MSA imaging had less artifacts. MSA imaging improved the elastographic contrast to noise ratio (CNRe) of the vascular elastograms by 14.58 dB relative to SA imaging, and 9.1 dB relative to compounded plane wave (CPW) imaging. Further, the results demonstrated that the elastographic performance of MSA imaging improved with increase in (a) the number of transmit-receive events and (b) the size of the transmit sub-aperture, up to 13 elements. Using larger sub-apertures degraded the elastographic performance. The results from the in vivo study were in good agreement with the phantom results. Specifically, using a defocused multi-element transmit sub-aperture for SA imaging improved the performance of vascular elastography.
The results suggested that MSA imaging can produce reliable vascular stain elastograms. Future studies will involve using coded excitations to improve the CNRe and frame-rate of the proposed technique for vascular elastography.
血管弹性成像可以可视化颈动脉中的应变分布,这对于评估高级斑块破裂的倾向可能很有用。在我们之前的研究中,我们证明了稀疏合成孔径 (SA) 成像可以产生高质量的血管应变弹性图像。然而,SA 成像的低输出功率可能会阻碍其临床应用。在这项研究中,我们假设多单元离焦发射可以克服这一限制并提高血管应变弹性图像的质量。
为了评估衰减对 SA 和(多单元合成孔径)MSA 成像的弹性成像性能的影响,我们使用具有理想(0.1dBcmMHz)和现实(0.75dBcmMHz)衰减的异质血管体模进行了实验。此外,我们在健康男性志愿者体内验证了体模研究的结果。所有回波成像均在 5MHz 的发射频率下进行,使用商业超声扫描仪(SonixRP,UltrasonixMedicalCorp.,Richmond,BC,加拿大)。
体模结果表明,所有应变弹性图像中均可见斑块,但使用 MSA 成像的斑块图像伪影较少。MSA 成像将血管弹性图像的弹性对比噪声比(CNRe)提高了 14.58dB 相对于 SA 成像,提高了 9.1dB 相对于复合平面波(CPW)成像。此外,结果表明,MSA 成像的弹性成像性能随着(a)发射-接收事件的数量和(b)发射子孔径的大小的增加而提高,最高可达 13 个元件。使用更大的子孔径会降低弹性成像性能。体内研究的结果与体模结果吻合良好。具体来说,使用离焦的多单元发射子孔径进行 SA 成像可以提高血管弹性成像的性能。
结果表明,MSA 成像可以产生可靠的血管应变弹性图像。未来的研究将涉及使用编码激励来提高所提出的血管弹性成像技术的 CNRe 和帧率。