Gao Jing, Wang Xiao-Xia, Wang Lin, Sun Yuan, Liu Rui-Fen, Zhao Qi
Department of Ophthalmology, The Second Affiliated Hospital of Dalian Medical University, Dalian, Liaoning Province, China.
J Ophthalmol. 2017;2017:5786265. doi: 10.1155/2017/5786265. Epub 2017 Jun 1.
To investigate the effect of the degree of astigmatism on optical quality in children. The important objective evaluation parameters we focus on include the RMS of the high-order aberrations, MTF, and PSF.
The children, age ranging from 7 to 10 years old, underwent an optometry examination. Fifty-nine children who met the inclusion criteria were divided into three groups: A (1.0 D ≤ astigmatism < 2.0 D), B (2.0 D ≤ astigmatism < 3.0 D), and C (3.0 D ≤ astigmatism < 4.0 D). The OPD-SCAN-III aberrometer was used to measure PSF, MTF, and other optical parameters. Total higher-order aberrations, total coma aberrations, total spherical aberrations, and total trefoil aberrations corresponding to the RMS value, the AR value of MTF, and the SR value of PSF with a 4 mm pupil diameter were assessed.
RMS-HO, RMS-T.Coma, RMS-T.Tre, and RMS-T.Sph in the three groups were significantly increased with increasing the degree of astigmatism, while there were no significant differences in RMS-T.Sph between the groups. The AR value and the SR value decreased with increasing degree of astigmatism, and there were significant differences in the AR value and the SR value.
Astigmatism has a significant influence on the higher-order aberrations, MTF, and PSF in the children. The effect of astigmatism value on the optical quality is mainly reflected in the change in these three parameters.
研究散光程度对儿童光学质量的影响。我们关注的重要客观评价参数包括高阶像差的均方根(RMS)、调制传递函数(MTF)和点扩散函数(PSF)。
对7至10岁的儿童进行验光检查。59名符合纳入标准的儿童被分为三组:A组(1.0 D≤散光<2.0 D)、B组(2.0 D≤散光<3.0 D)和C组(3.0 D≤散光<4.0 D)。使用OPD-SCAN-III像差仪测量PSF、MTF和其他光学参数。评估了与4毫米瞳孔直径对应的RMS值、MTF的AR值和PSF的SR值相关的总高阶像差、总彗差、总球差和总三叶形像差。
三组中的RMS-HO、RMS-T.Coma、RMS-T.Tre和RMS-T.Sph随着散光程度的增加而显著增加,而各组之间的RMS-T.Sph没有显著差异。AR值和SR值随着散光程度的增加而降低,并且AR值和SR值存在显著差异。
散光对儿童的高阶像差、MTF和PSF有显著影响。散光值对光学质量的影响主要体现在这三个参数的变化上。