Central Laser Facility, Research Complex at Harwell, STFC Rutherford Appleton Laboratory, Harwell Campus, Didcot OX11 0QX, UK.
UCL Institute of Orthopaedics and Musculoskeletal Science, Royal National Orthopaedic Hospital, London HA7 4LP, UK.
Analyst. 2017 Aug 21;142(17):3219-3226. doi: 10.1039/c7an00408g.
The ability of Spatially Offset Raman Spectroscopy (SORS) to obtain chemically specific information from below the sample surface makes it a promising technique for non-invasive in vivo diagnosis of bone conditions by sampling bone through the skin. The depth below a surface interrogated by SORS depends on the system's optical properties and is difficult to estimate for complex bone material. This paper uses 830 nm laser excitation to investigate the influence of bone mineralization on photon migration properties in deer antler cortex, equine metacarpal cortex and whale tympanic bulla. Thin slices form each type of bone (thickness: 0.6-1.0 mm) were cut and put together on top of each other forming stacks with a total thickness of 4.1-4.7 mm. A 0.38 mm thin slice of polytetrafluoroethylene (PTFE) served as a test material for Raman signal recovery and was placed in between the individual bone slices within the stack. At SORS offsets of 8.0-9.5 mm Raman bands of materials not present in healthy bone (e.g. PTFE as an example) can be recovered through 4.4-4.7 mm of cortical bone tissue, depending on mineralization level and porosity. These findings significantly increase our understanding of SORS analysis through bones of different composition and provide information that is vital to determine the value of SORS as a medical diagnostic technique. The data serve to define which SORS offset is best deployed for the non-invasive detection of chemically specific markers associated with infection, degeneration and disease or cancer within bone.
空间偏移拉曼光谱(SORS)能够从样品表面以下获取具有化学特异性的信息,这使得它成为一种很有前途的技术,可以通过穿过皮肤对骨骼进行采样,从而实现对骨骼状况的非侵入性体内诊断。SORS 从表面下探测的深度取决于系统的光学特性,对于复杂的骨骼材料来说,很难进行估计。本文使用 830nm 激光激发,研究了骨矿化对鹿角皮质、马掌皮质和鲸鱼鼓膜中光子迁移特性的影响。从每种类型的骨骼(厚度:0.6-1.0mm)中切下薄片,将它们彼此堆叠在一起,形成总厚度为 4.1-4.7mm 的堆叠。厚度为 0.38mm 的聚四氟乙烯(PTFE)薄片用作拉曼信号恢复的测试材料,并放置在堆叠中各个骨片之间。在 SORS 偏移 8.0-9.5mm 时,可以通过 4.4-4.7mm 的皮质骨组织恢复健康骨骼中不存在的材料的 Raman 带(例如,以 PTFE 为例),具体取决于矿化程度和孔隙率。这些发现显著提高了我们对不同成分骨骼中 SORS 分析的理解,并提供了确定 SORS 作为医学诊断技术的价值的重要信息。这些数据有助于确定用于非侵入性检测与感染、退化和疾病或癌症相关的化学特异性标记物的最佳 SORS 偏移量。