Martins Jorge, Bahubalindruni Pydi, Rovisco Ana, Kiazadeh Asal, Martins Rodrigo, Fortunato Elvira, Barquinha Pedro
CENIMAT/I3N, Departamento de Ciência dos Materiais, Faculdade de Ciências e Tecnologia (FCT), Universidade NOVA de Lisboa (UNL) and CEMOP/UNINOVA, 2829-516 Caparica, Portugal.
IIIT Delhi, Okhla Industrial Estate, Phase III, New Delhi 110020, India.
Materials (Basel). 2017 Jun 21;10(6):680. doi: 10.3390/ma10060680.
This paper focuses on the analysis of InGaZnO thin-film transistors (TFTs) and circuits under the influence of different temperatures and bias stress, shedding light into their robustness when used in real-world applications. For temperature-dependent measurements, a temperature range of 15 to 85 °C was considered. In case of bias stress, both gate and drain bias were applied for 60 min. Though isolated transistors show a variation of drain current as high as 56% and 172% during bias voltage and temperature stress, the employed circuits were able to counteract it. Inverters and two-TFT current mirrors following simple circuit topologies showed a gain variation below 8%, while the improved robustness of a cascode current mirror design is proven by showing a gain variation less than 5%. The demonstration that the proper selection of TFT materials and circuit topologies results in robust operation of oxide electronics under different stress conditions and over a reasonable range of temperatures proves that the technology is suitable for applications such as smart food packaging and wearables.
本文着重分析了不同温度和偏置应力影响下的铟镓锌氧化物薄膜晶体管(TFT)及电路,揭示了它们在实际应用中的稳健性。对于与温度相关的测量,考虑的温度范围为15至85°C。在偏置应力情况下,栅极和漏极偏置均施加60分钟。尽管隔离晶体管在偏置电压和温度应力期间显示出高达56%和172%的漏极电流变化,但所采用的电路能够抵消这种变化。遵循简单电路拓扑的反相器和双TFT电流镜显示增益变化低于8%,而共源共栅电流镜设计通过显示增益变化小于5%证明了其更高稳健性。适当选择TFT材料和电路拓扑可使氧化物电子器件在不同应力条件和合理温度范围内实现稳健运行,这一证明表明该技术适用于智能食品包装和可穿戴设备等应用。