Suppr超能文献

巴西受影响的城市和工业化地区可沉降颗粒物的源解析。

Source apportionment of settleable particles in an impacted urban and industrialized region in Brazil.

机构信息

Department of Environmental Engineering, Universidade Federal do Espírito Santo (UFES), 29.060-910, Vitoria, Brazil.

State Institute of Environment and Water Resources of Espirito Santo (Instituto Estadual de Meio Ambiente e Recursos Hídricos do Espírito Santo - IEMA), Vitoria, ES, Brazil.

出版信息

Environ Sci Pollut Res Int. 2017 Sep;24(27):22026-22039. doi: 10.1007/s11356-017-9677-y. Epub 2017 Aug 7.

Abstract

Settleable particulate matter (SPM), especially coarser particles with diameters greater than 10 μm, has been found culprit of high deposition rates in cities affected by hinterland industrial activities. This is the case of Metropolitan Region of Vitoria (MRV), Espirito Santo, Brazil where industrial facilities are located within the urban sprawl and building constructions are intense. Frequent population complaints to the environmental protection agency (IEMA) throughout the years have triggered monitoring campaigns to determine SPM deposition rates and source apportionment. Eight different locations were monitored throughout the MRV, and SPM was quantified and chemically characterized. Sources profiles were defined either by using US EPA SPECIATE data or by experimental analysis. Atmospheric fallout in the MRV ranged between 2 and 20g/(m 30-day), with only one monitoring station ranging from 6-10 g/(m 30-day). EC, OC, Fe, Al, and Si were found the main constituents of dry deposition in the region. Source apportionment by the chemical mass balance (CMB) model determined that steel and iron ore pelletizing industries were the main contributor to one of the eight locations whereas resuspension, civil construction, and vehicular sources were also very important contributors to the other stations. Quarries and soil were also considered expressive SPM sources, but at the city periphery. CMB model could differentiate contributions from six industrial source groups: thermoelectric; iron ore, pellet, and pellet furnaces; coal coke and coke oven; sintering, blast furnace, and basic oxygen furnace; and soil, resuspension, and vehicles. However, the CMB model was unable to differentiate between iron ore and pellet stockpiles which are present in both steel and iron ore pelletizing industries. Further characterization of source and SPM might be necessary to aid local authorities in decision-making regarding these two industrial sources.

摘要

可沉降颗粒物(SPM),尤其是直径大于 10μm 的较粗颗粒,已被发现是受内陆工业活动影响的城市中高沉积速率的罪魁祸首。巴西圣埃斯皮里图州维多利亚都会区(MRV)就是这种情况,该地区的工业设施位于城市扩张范围内,建筑施工密集。多年来,居民经常向环境保护局(IEMA)投诉,这促使他们开展了监测活动,以确定 SPM 的沉积速率和来源分配。在整个 MRV 共监测了八个不同的地点,并对 SPM 进行了定量和化学特征分析。源谱通过使用美国环保署 SPECIATE 数据或实验分析来定义。MRV 的大气沉降量在 2 到 20g/(m 30 天)之间,只有一个监测站的沉降量在 6-10g/(m 30 天)之间。EC、OC、Fe、Al 和 Si 是该地区干沉降的主要成分。通过化学质量平衡(CMB)模型进行的源分配确定,钢铁和铁矿球团厂是八个地点之一的主要贡献者,而扬尘、民用建筑和车辆也是其他站点的重要贡献者。采石场和土壤也被认为是 SPM 的重要来源,但位于城市周边。CMB 模型可以区分来自六个工业源组的贡献:火力发电;铁矿、球团和球团炉;煤焦和焦炉;烧结、高炉和碱性氧气炉;以及土壤、扬尘和车辆。然而,CMB 模型无法区分钢铁和铁矿球团厂都存在的铁矿和球团矿料堆。进一步对源和 SPM 进行特征描述可能有助于地方当局在这两个工业源的决策方面提供帮助。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验