Suppr超能文献

第一代和第二代全软质缝合式肩胛盂锚钉的生物力学比较

Biomechanical Comparison of a First- and a Second-Generation All-Soft Suture Glenoid Anchor.

作者信息

Erickson John, Chiarappa Frank, Haskel Jonathan, Rice Justin, Hyatt Adam, Monica James, Dhawan Aman

机构信息

Department of Orthopaedics, Rutgers-Robert Wood Johnson Medical School (UMDNJ Legacy), New Brunswick, New Jersey, USA.

Penn State Hershey Bone and Joint Institute, Hershey, Pennsylvania, USA.

出版信息

Orthop J Sports Med. 2017 Jul 20;5(7):2325967117717010. doi: 10.1177/2325967117717010. eCollection 2017 Jul.

Abstract

BACKGROUND

All-soft tissue suture anchors provide advantages of decreased removal of bone and decreased glenoid volume occupied compared with traditional tap or screw-in suture anchors. Previous published data have led to biomechanical concerns with the use of first-generation all-soft suture anchors.

PURPOSE/HYPOTHESIS: The purpose of this study was to evaluate the load to 2-mm displacement and ultimate load to failure of a second-generation all-soft suture anchor, compared with a first-generation anchor and a traditional PEEK (polyether ether ketone) anchor. The null hypothesis was that the newer second-generation anchor will demonstrate no difference in loads to 2-mm displacement after cycling compared with first-generation all-soft suture anchors.

STUDY DESIGN

Controlled laboratory study.

METHODS

Twenty human cadaveric glenoids were utilized to create 97 total suture anchor sites, and 1 of 3 anchors were randomized and placed into each site: (1) first-generation all-soft suture anchor (Juggerknot; Biomet), (2) second-generation all-soft suture anchor (Suturefix; Smith & Nephew), and (3) a control PEEK anchor (Bioraptor; Smith & Nephew). After initial cyclic loading, load to 2 mm of displacement and ultimate load to failure were measured for each anchor.

RESULTS

After cyclic loading, the load to 2-mm displacement was significantly less in first-generation anchors compared with controls ( < .01). However, the load to 2-mm displacement was significantly greater in second-generation anchors compared with controls ( < .01). There was no difference in ultimate load to failure between the first- and second-generation all-soft suture anchors ( > .05).

CONCLUSION

The newer generation all-soft suture anchors with a theoretically more rigid construct and deployment configuration demonstrate biomechanical characteristics (specifically, with load to 2-mm displacement after cyclic loading) that are improved over first-generation all-soft suture anchors and similar to a traditional solid tap-in anchor. The configuration of these newer generation all-soft suture anchors appears to mitigate the biomechanical concerns of decreased load to failure with first-generation all-soft tissue suture anchors.

CLINICAL RELEVANCE

The theoretical advantages of all-soft anchors may be particularly valuable in revision surgery or in cases where multiple anchors are being placed into a small anatomic area.

摘要

背景

与传统的丝锥式或拧入式缝线锚钉相比,全软组织缝线锚钉具有减少骨移除和减少占用关节盂体积的优点。先前发表的数据引发了对第一代全软缝线锚钉使用的生物力学担忧。

目的/假设:本研究的目的是评估第二代全软缝线锚钉与第一代锚钉和传统聚醚醚酮(PEEK)锚钉相比,在位移2毫米时的负荷以及极限破坏负荷。零假设是,与第一代全软缝线锚钉相比,新型第二代锚钉在循环后位移2毫米时的负荷无差异。

研究设计

对照实验室研究。

方法

使用20个尸体关节盂创建97个缝线锚钉位点,将3种锚钉中的1种随机放入每个位点:(1)第一代全软缝线锚钉(Juggerknot;Biomet),(2)第二代全软缝线锚钉(Suturefix;Smith & Nephew),(3)对照PEEK锚钉(Bioraptor;Smith & Nephew)。在初始循环加载后,测量每个锚钉位移2毫米时的负荷和极限破坏负荷。

结果

循环加载后,第一代锚钉位移2毫米时的负荷与对照组相比显著更低(P <.01)。然而,第二代锚钉位移2毫米时的负荷与对照组相比显著更高(P <.01)。第一代和第二代全软缝线锚钉的极限破坏负荷无差异(P >.05)。

结论

理论上结构和植入配置更坚固的新一代全软缝线锚钉表现出的生物力学特性(特别是循环加载后位移2毫米时的负荷)优于第一代全软缝线锚钉,且与传统实心拧入式锚钉相似。这些新一代全软缝线锚钉的配置似乎减轻了第一代全软组织缝线锚钉破坏负荷降低的生物力学担忧。

临床意义

全软锚钉的理论优势在翻修手术或多个锚钉植入小解剖区域的情况下可能特别有价值。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/a331/5524240/f15c967ff13a/10.1177_2325967117717010-fig1.jpg

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验