Varadarajan Balamurugan, Vogt Andreas, Hartwich Volker, Vasireddy Rakesh, Consiglio Jolanda, Hugi-Mayr Beate, Eberle Balthasar
Department of Anesthesiology and Pain Medicine, Inselspital, Bern University Hospital, University of Bern, Bern, Switzerland.
Department of Cardiac and Vascular Surgery, Inselspital, Bern University Hospital, University of Bern, Bern, Switzerland.
PLoS One. 2017 Sep 6;12(9):e0184212. doi: 10.1371/journal.pone.0184212. eCollection 2017.
The Multiple Inert Gas Elimination Technique, based on Micropore Membrane Inlet Mass Spectrometry, (MMIMS-MIGET) has been designed as a rapid and direct method to assess the full range of ventilation-to-perfusion (V/Q) ratios. MMIMS-MIGET distributions have not been assessed in an experimental setup with predefined V/Q-distributions. We aimed (I) to construct a novel in vitro lung model (IVLM) for the simulation of predefined V/Q distributions with five gas exchange compartments and (II) to correlate shunt fractions derived from MMIMS-MIGET with preset reference shunt values of the IVLM. Five hollow-fiber membrane oxygenators switched in parallel within a closed extracorporeal oxygenation circuit were ventilated with sweep gas (V) and perfused with human red cell suspension or saline (Q). Inert gas solution was infused into the perfusion circuit of the gas exchange assembly. Sweep gas flow (V) was kept constant and reference shunt fractions (IVLM-S) were established by bypassing one or more oxygenators with perfusate flow (Q). The derived shunt fractions (MM-S) were determined using MIGET by MMIMS from the retention data. Shunt derived by MMIMS-MIGET correlated well with preset reference shunt fractions. The in vitro lung model is a convenient system for the setup of predefined true shunt fractions in validation of MMIMS-MIGET.
基于微孔膜进样质谱法的多惰性气体消除技术(MMIMS-MIGET)被设计为一种快速、直接评估通气/灌注(V/Q)比值全范围的方法。尚未在具有预定义V/Q分布的实验装置中评估MMIMS-MIGET分布情况。我们的目的是:(I)构建一种新型体外肺模型(IVLM),用于模拟具有五个气体交换隔室的预定义V/Q分布;(II)将MMIMS-MIGET得出的分流分数与IVLM的预设参考分流值相关联。在一个封闭的体外氧合回路中,五个并联的中空纤维膜氧合器用吹扫气体(V)进行通气,并用人体红细胞悬液或盐水(Q)进行灌注。将惰性气体溶液注入气体交换组件的灌注回路中。吹扫气体流量(V)保持恒定,通过用灌注液流量(Q)绕过一个或多个氧合器来建立参考分流分数(IVLM-S)。使用MMIMS通过MIGET从保留数据中确定得出的分流分数(MM-S)。MMIMS-MIGET得出的分流与预设参考分流分数相关性良好。体外肺模型是在验证MMIMS-MIGET时设置预定义真实分流分数的便利系统。