Suppr超能文献

基于壳聚糖的三层支架用于多组织牙周再生。

Chitosan-Based Trilayer Scaffold for Multitissue Periodontal Regeneration.

机构信息

1 Dipartimento di Scienze Biomediche, Chirurgiche ed Odontoiatriche, Università degli Studi di Milano, Milano, Italy.

2 Department of Materials Engineering, McGill University, Montreal, Canada.

出版信息

J Dent Res. 2018 Mar;97(3):303-311. doi: 10.1177/0022034517736255. Epub 2017 Oct 18.

Abstract

Periodontal regeneration is still a challenge for periodontists and tissue engineers, as it requires the simultaneous restoration of different tissues-namely, cementum, gingiva, bone, and periodontal ligament (PDL). Here, we synthetized a chitosan (CH)-based trilayer porous scaffold to achieve periodontal regeneration driven by multitissue simultaneous healing. We produced 2 porous compartments for bone and gingiva regeneration by cross-linking with genipin either medium molecular weight (MMW) or low molecular weight (LMW) CH and freeze-drying the resulting scaffolds. We synthetized a third compartment for PDL regeneration by CH electrochemical deposition; this allowed us to produce highly oriented microchannels of about 450-µm diameter intended to drive PDL fiber growth toward the dental root. In vitro characterization showed rapid equilibrium water content for MMW-CH and LMW-CH compartments (equilibrium water content after 5 min >85%). The MMW-CH compartment degraded more slowly and provided significantly more resistance to compression (28% ± 1% of weight loss at 4 wk; compression modulus H = 18 ± 6 kPa) than the LMW-CH compartment (34% ± 1%; 7.7 ± 0.8 kPa) as required to match the physiologic healing rates of bone and gingiva and their mechanical properties. More than 90% of all human primary periodontal cell populations tested on the corresponding compartment survived during cytocompatibility tests, showing active cell metabolism in the alkaline phosphatase and collagen deposition assays. In vivo tests showed high biocompatibility in wild-type mice, tissue ingrowth, and vascularization within the scaffold. Using the periodontal ectopic model in nude mice, we preseeded scaffold compartments with human gingival fibroblasts, osteoblasts, and PDL fibroblasts and found a dense mineralized matrix within the MMW-CH region, with weakly mineralized deposits at the dentin interface. Together, these results support this resorbable trilayer scaffold as a promising candidate for periodontal regeneration.

摘要

牙周组织再生仍然是牙周病学家和组织工程师面临的挑战,因为它需要同时修复不同的组织,即牙骨质、牙龈、骨和牙周膜(PDL)。在这里,我们合成了一种壳聚糖(CH)基三层多孔支架,以实现多组织同时愈合驱动的牙周组织再生。我们通过与基因胶交联,分别用中分子量(MMW)或低分子量(LMW)CH 生产出 2 个用于骨和牙龈再生的多孔隔室,并通过冷冻干燥得到支架。我们通过 CH 电化学沉积合成了第三个用于 PDL 再生的隔室;这使我们能够产生高度取向的微通道,直径约为 450-µm,旨在引导 PDL 纤维向牙根生长。体外特性表明 MMW-CH 和 LMW-CH 隔室具有快速的平衡含水量(5 分钟后平衡含水量>85%)。MMW-CH 隔室的降解速度较慢,对压缩的抵抗力显著增强(4 周时重量损失 28%±1%;压缩模量 H = 18±6 kPa),明显优于 LMW-CH 隔室(34%±1%;7.7±0.8 kPa),这与骨和牙龈的生理愈合速度及其机械性能相匹配。在相应隔室上进行的人类主要牙周细胞群体的细胞相容性试验中,超过 90%的细胞存活,在碱性磷酸酶和胶原蛋白沉积测定中显示出活跃的细胞代谢。在野生型小鼠中进行的体内试验表明该支架具有高度的生物相容性,支架内有组织向内生长和血管化。在裸鼠的牙周异位模型中,我们用人类牙龈成纤维细胞、成骨细胞和 PDL 成纤维细胞预种支架隔室,在 MMW-CH 区域内发现了密集的矿化基质,在牙本质界面有较弱矿化的沉积物。总的来说,这些结果支持这种可吸收的三层支架作为牙周组织再生的有前途的候选材料。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验