Department of Aerospace Engineering and Mechanics, University of Minnesota , Minneapolis, Minnesota.
Department of Medicine, Veterans Affairs Medical Center, University of Minnesota , Minneapolis, Minnesota.
J Appl Physiol (1985). 2018 Feb 1;124(2):400-413. doi: 10.1152/japplphysiol.00490.2017. Epub 2017 Nov 2.
The accurate representation of the human airway anatomy is crucial for understanding and modeling the structure-function relationship in both healthy and diseased lungs. The present knowledge in this area is based on morphometric studies of excised lung casts, partially complemented by in vivo studies in which computed tomography (CT) was used on a small number of subjects. In the present study, we analyzed CT scans of a cohort of healthy subjects and obtained comprehensive morphometric information down to the seventh generation of bronchial branching, including airway diameter, length, branching angle, and rotation angle. Although some of the geometric parameters (such as the child-to-parent branch diameter ratio) are found to be in line with accepted values, for others (such as the branch length-to-diameter ratio) our findings challenge the common assumptions. We also evaluated several metrics of self-similarity, including the fractal dimension of the airway tree. Additionally, we used phase-contrast magnetic resonance imaging (MRI) to obtain the volumetric flow field in the three-dimensional-printed airway model of one of the subjects during steady inhalation. This is used to relate structural and functional parameters and, in particular, to close the power-law relationship between branch flow rate and diameter. The diameter exponent is found to be significantly lower than in the usually assumed Poiseuille regime, which we attribute to the strong secondary (i.e., transverse) velocity component. The strength of the secondary velocity with respect to the axial component exceeds the levels found in idealized airway models and persists within the first seven generations. NEW & NOTEWORTHY We performed a comprehensive computed tomography-based study of the conductive airway morphology in normal human subjects, including branch diameter, length, and mutual angles. We found significant departure from classic homothetic relationships. We also carried out MRI measurements of the three-dimensional inspiratory flow in an anatomy-based model and directly assessed structure-function relationships that have so far been assumed. We found that strong secondary flows (i.e., transverse velocity components) persist through the first seven generations of bronchial branching.
人类气道解剖结构的准确表示对于理解和模拟健康和患病肺部的结构-功能关系至关重要。目前这方面的知识基于对离体肺铸型的形态计量学研究,部分补充了对少数受试者进行的体内研究,其中使用了计算机断层扫描 (CT)。在本研究中,我们分析了一组健康受试者的 CT 扫描,并获得了直至第七代支气管分支的综合形态计量学信息,包括气道直径、长度、分支角度和旋转角度。虽然一些几何参数(例如子支与父支直径比)与公认值相符,但对于其他参数(例如分支长度与直径比),我们的发现对常见假设提出了挑战。我们还评估了几个自相似性指标,包括气道树的分形维数。此外,我们还使用相位对比磁共振成像 (MRI) 在一位受试者的三维打印气道模型中获得了稳定吸气期间的容积流场。这用于关联结构和功能参数,特别是关闭分支流量与直径之间的幂律关系。发现直径指数明显低于通常假设的泊肃叶区,我们将其归因于强二次(即横向)速度分量。与轴向分量相比,二次速度的强度超过了理想化气道模型中的水平,并在最初的七个分支中持续存在。
我们对正常人体传导气道形态进行了全面的基于计算机断层扫描的研究,包括分支直径、长度和相互角度。我们发现与经典同型关系有显著偏离。我们还在基于解剖结构的模型中进行了 MRI 测量三维吸气流,并直接评估了迄今为止被假定的结构-功能关系。我们发现强二次流(即横向速度分量)一直持续到支气管分支的前七个分支。