Mendoza Gracia, Regiel-Futyra Anna, Tamayo Alejandra, Monzon Marta, Irusta Silvia, de Gregorio Miguel Angel, Kyzioł Agnieszka, Arruebo Manuel
1 Department of Chemical Engineering, Aragon Institute of Nanoscience (INA), 88201 University of Zaragoza , Campus Río Ebro-Edificio I+D, C/ Mariano Esquillor S/N, Zaragoza, Spain; Networking Research Center on Bioengineering, Biomaterials and Nanomedicine, CIBER-BBN, Madrid, Spain; Aragon Health Research Institute (IIS Aragón), Zaragoza, Spain.
2 Faculty of Chemistry, Jagiellonian University, Ingardena 3, Kraków, Poland.
J Biomater Appl. 2018 Jan;32(6):725-737. doi: 10.1177/0885328217739199. Epub 2017 Nov 7.
Central venous access devices play an important role in patients with prolonged intravenous administration requirements. In the last years, the coating of these devices with bactericidal compounds has emerged as a potential tool to prevent bacterial colonization. Our study describes the modification of 3D-printed reservoirs and silicone-based catheters, mimicking central venous access devices, through different approaches including their coating with the well known biocompatible and bactericidal polymer chitosan, with the anionic polysaccharide alginate; also, plasma treated surfaces were included in the study to promote polymer adhesion. The evaluation of the antimicrobial action of those surface modifications compared to that exerted by a model antibiotic (ciprofloxacin) adsorbed on the surface of the devices was carried out. Surface characterization was developed by different methodologies and the bactericidal effects of the different coatings were assayed in an in vitro model of Staphylococcus aureus infection. Our results showed a significant reduction in the reservoir roughness (≤73%) after coating though no changes were observed for coated catheters which was also confirmed by scanning electron microscopy, pointing to the importance of the surface device topography for the successful attachment of the coating and for the subsequent development of bactericidal effects. Furthermore, the single presence of chitosan on the reservoirs was enough to fully inhibit bacterial growth exerting the same efficiency as that showed by the model antibiotic. Importantly, chitosan coating showed low cytotoxicity against human keratinocytes, human lung adenocarcinoma epithelial cells, and murine colon carcinoma cells displaying viability percentages in the range of the control samples (>95%). Chitosan-based coatings are proposed as an effective and promising solution in the prevention of microbial infections associated to medical devices.
中心静脉通路装置在需要长期静脉给药的患者中发挥着重要作用。在过去几年中,用杀菌化合物对这些装置进行涂层处理已成为预防细菌定植的一种潜在手段。我们的研究描述了通过不同方法对模拟中心静脉通路装置的3D打印储液器和硅基导管进行改性,包括用著名的生物相容性杀菌聚合物壳聚糖、阴离子多糖海藻酸盐对其进行涂层处理;此外,研究中还包括对表面进行等离子体处理以促进聚合物粘附。对这些表面改性的抗菌作用与吸附在装置表面的模型抗生素(环丙沙星)的抗菌作用进行了比较评估。通过不同方法进行了表面表征,并在金黄色葡萄球菌感染的体外模型中测定了不同涂层的杀菌效果。我们的结果表明,涂层后储液器粗糙度显著降低(≤73%),但涂层导管未观察到变化,扫描电子显微镜也证实了这一点,这表明表面装置形貌对于涂层的成功附着以及随后杀菌效果的产生非常重要。此外,储液器上仅壳聚糖的存在就足以完全抑制细菌生长,其效率与模型抗生素相同。重要的是,壳聚糖涂层对人角质形成细胞、人肺腺癌上皮细胞和小鼠结肠癌细胞显示出低细胞毒性,其活力百分比在对照样品范围内(>95%)。基于壳聚糖的涂层被认为是预防与医疗器械相关的微生物感染的一种有效且有前景的解决方案。