Center for Nanoscale Systems, Harvard University , 11 Oxford Street, Cambridge, Massachusetts 02138, United States.
ACS Appl Mater Interfaces. 2017 Dec 13;9(49):42905-42911. doi: 10.1021/acsami.7b13307. Epub 2017 Dec 4.
Chip-scale chemical sensors were demonstrated using optical waveguides consisting of amorphous silicon (a-Si) and aluminum nitride (AlN). A mid-infrared (mid-IR) transparent AlN thin film was prepared by room-temperature sputtering, which exhibited high Al/N elemental homogeneity. The Si-on-AlN waveguides were fabricated by a complementary metal-oxide-semiconductor process. A sharp fundamental mode and low optical loss of 2.21 dB/cm were obtained. Label-free chemical identification and real-time monitoring were performed by scanning the mode spectrum while the waveguide was exposed to various chemicals. Continuous tracing of heptane and methanol was accomplished by measuring the waveguide intensity attenuation at λ = 2.5-3.0 μm, which included the characteristic -CH and -OH absorptions. The monolithically integrated Si-on-AlN waveguides established a new sensor platform that can operate over a broad mid-IR regime, thus enabling photonic chips for label-free chemical detection.
采用由非晶硅(a-Si)和氮化铝(AlN)组成的光波导演示了片上化学传感器。通过室温溅射制备了中红外(mid-IR)透明 AlN 薄膜,表现出高的 Al/N 元素均匀性。通过互补金属氧化物半导体(CMOS)工艺制备了 Si-on-AlN 波导。获得了尖锐的基模和低的光学损耗 2.21 dB/cm。通过在波导暴露于各种化学物质的同时扫描模式光谱进行无标记化学识别和实时监测。通过测量 λ = 2.5-3.0 μm 处的波导强度衰减,实现了庚烷和甲醇的连续跟踪,其中包括特征-CH 和-OH 吸收。单片集成的 Si-on-AlN 波导建立了一个新的传感器平台,可以在宽的中红外范围内工作,从而实现了用于无标记化学检测的光子芯片。