Computational fluid dynamics study of the end-side and sequential coronary artery bypass anastomoses in a native coronary occlusion model.

OBJECTIVES

The objective of this study was to evaluate the haemodynamic patterns in each anastomosis fashion using a computational fluid dynamic study in a native coronary occlusion model.

METHODS

Fluid dynamic computations were carried out with ANSYS CFX (ANSYS Inc., Canonsburg, PA, USA) software. The incision lengths for parallel and diamond anastomoses were fixed at 2 mm. Native vessels were set to be totally occluded. The diameter of both the native and graft vessels was set to be 2 mm. The inlet boundary condition was set by a sample of the transient time flow measurement which was measured intraoperatively.

RESULTS

The diamond anastomosis was observed to reduce flow to the native outlet and increase flow to the bypass outlet; the opposite was observed in the parallel anastomosis. Total energy efficiency was higher in the diamond anastomosis than the parallel anastomosis. Wall shear stress was higher in the diamond anastomosis than in the parallel anastomosis; it was the highest at the top of the outlet. A high oscillatory shear index was observed at the bypass inlet in the parallel anastomosis and at the native inlet in the diamond anastomosis.

CONCLUSIONS

The diamond sequential anastomosis would be an effective option for multiple sequential bypasses because of the better flow to the bypass outlet than with the parallel anastomosis. However, flow competition should be kept in mind while using the diamond anastomosis for moderately stenotic vessels because of worsened flow to the native outlet. Care should be taken to ensure that the fluid dynamics patterns are optimal and prevent future native and bypass vessel disease progression.