Simsek Abdulmuttalip, Bullock Anthony J, Roman Sabi, Chapple Chirstoper R, Macneil Sheila
Royal Hallamshire Hospital, Department of Female and Reconstructive Urology, Sheffield; United Kingdom.
University of Sheffield, Department of Materials Science & Engineering, Sheffield; United Kingdom.
Can Urol Assoc J. 2018 May;12(5):E234-E242. doi: 10.5489/cuaj.4826. Epub 2018 Feb 6.
We aimed to compare alternative synthetic scaffolds suitable for future implantation and to examine the use of an inhibitor of lysyl oxidase (beta-amino-propionitrile [β-APN]) to reduce contraction in these implants.
Three synthetic scaffolds were compared to natural dermis as substrates for the production of tissue-engineered skin. For natural dermis, Euroskin was used to provide a cell-free cadaveric dermis. Synthetic scaffolds consisted of microfibrous poly-L-lactic acid (PLA), nanofibrous poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV), and a micro-/nanofibrous trilayer of PLA-PHBV-PLA. The latter were all electrospun and then all four scaffolds (three synthetic, one natural) were placed in six well plates. A culture well was formed on the scaffold using a 1 cm diameter stainless steel ring and 1.5×10 oral fibroblasts were seeded one side; after two days of culture, the ring was placed on the other side of the scaffolds and 3×10 oral keratinocytes were seeded on to the scaffolds and cultured with keratinocytes uppermost. After a further two days of culture, scaffolds were cut to 1 cm and raised to an air-liquid interface on stainless steel grids; some were treated with 200 μg/mL β-APN throughout the culture period (28 days). Contraction in vitro was assessed by serial digital photography of cell-seeded scaffolds and cell-free scaffolds three times a week for 28 days. All cell-seeded scaffolds were assessed for cell metabolic activity, mechanical properties, histology, and morphology by scanning electron microscopy (SEM).
The mean fibre diameters and pore sizes of PLA and PHBV scaffolds were 2.4±0.77, 0.85±0.21 μm (p<0.001), and 10.8±2.3, 4.3±1.1 μm (p<0.001), respectively. Oral fibroblasts and keratinocytes were tightly adhered and grew well on both surfaces of trilayer. The ultimate tensile strength (UTS) and Young's modulus (YM) of PLA samples were significantly lower than Euroskin (p<0.001 and p<0.05, respectively); only the UTS of the trilayer samples was slightly significantly lower (p<0.05). Metabolic activity was significantly increased for cells on all scaffolds, without significant differences between them from Day 0 to Day 28. There were no adverse effects of β-APN on cell viability. With respect to contraction, cells on trilayer and PHBV monolayers did not undergo any significant contraction; however, cells on PLA monolayer and Euroskin contracted 25.3% and 56.4%, respectively, over 28 days. The addition of 200 μg/ml β-APN significantly reduced contraction of Euroskin compared with the control (p<0.01); however, β-APN did not affect PLA contraction during this culture period (p>0.05).
This study shows that a trilayer micro-nano-3D porous synthetic scaffold is suitable for oral keratinocyte and fibroblast growth with good cell viability and minimal contraction. This material also has good mechanical properties and histological analyses showed its ability to mimic normal human oral mucosal morphology. Furthermore, synthetic trilayer scaffolds have advantages over biological scaffolds - there is no risk of disease transmission or immunological rejection and they appear resistant to contraction. We suggest they present a good alternative to allodermis for future use in urethral reconstruction.
我们旨在比较适合未来植入的替代性合成支架,并研究使用赖氨酰氧化酶抑制剂(β-氨基丙腈[β-APN])来减少这些植入物中的收缩。
比较三种合成支架与天然真皮作为组织工程皮肤生产的基质。对于天然真皮,使用Euroskin提供无细胞尸体真皮。合成支架由微纤维聚-L-乳酸(PLA)、纳米纤维聚(3-羟基丁酸酯-co-3-羟基戊酸酯)(PHBV)以及PLA-PHBV-PLA的微/纳米纤维三层结构组成。后者均通过静电纺丝制备,然后将所有四种支架(三种合成支架,一种天然支架)置于六孔板中。使用直径1厘米的不锈钢环在支架上形成培养孔,在一侧接种1.5×10个口腔成纤维细胞;培养两天后,将环置于支架的另一侧,在支架上接种3×10个口腔角质形成细胞,并使角质形成细胞处于最上层进行培养。再培养两天后,将支架切成1厘米,并在不锈钢网格上提升至气液界面;一些在整个培养期(28天)用200μg/mL的β-APN处理。通过每周三次对接种细胞的支架和无细胞支架进行连续数码拍照,评估28天内的体外收缩情况。通过扫描电子显微镜(SEM)对所有接种细胞的支架进行细胞代谢活性、力学性能、组织学和形态学评估。
PLA和PHBV支架的平均纤维直径和孔径分别为2.4±0.77、0.85±0.21μm(p<0.001)和10.8±2.3、4.3±1.1μm(p<0.001)。口腔成纤维细胞和角质形成细胞在三层结构的两个表面均紧密黏附且生长良好。PLA样品的极限拉伸强度(UTS)和杨氏模量(YM)显著低于Euroskin(分别为p<0.001和p<0.05);只有三层样品的UTS略低(p<0.05)。所有支架上细胞的代谢活性均显著增加,从第0天到第28天它们之间无显著差异。β-APN对细胞活力无不良影响。关于收缩,三层结构和PHBV单层上的细胞未发生任何显著收缩;然而,PLA单层和Euroskin上的细胞在28天内分别收缩了25.3%和56.4%。与对照组相比,添加200μg/ml的β-APN显著降低了Euroskin的收缩(p<0.01);然而,在此培养期内β-APN未影响PLA的收缩(p>0.05)。
本研究表明,三层微纳米3D多孔合成支架适合口腔角质形成细胞和成纤维细胞生长,具有良好的细胞活力且收缩最小。该材料还具有良好的力学性能,组织学分析显示其能够模拟正常人口腔黏膜形态。此外,合成三层支架优于生物支架——不存在疾病传播或免疫排斥风险,且似乎抗收缩。我们认为它们是未来尿道重建中同种异体真皮的良好替代品。