Suppr超能文献

基于 FSR 的地面接触力的实时步态相位检测自调门限方法。

Self-Tuning Threshold Method for Real-Time Gait Phase Detection Based on Ground Contact Forces Using FSRs.

机构信息

School of Information Engineering, Wuhan University of Technology, Wuhan 430070, China.

Key Laboratory of Fiber Optic Sensing Technology and Information Processing, Ministry of Education, Wuhan University of Technology, Wuhan 430070, China.

出版信息

Sensors (Basel). 2018 Feb 6;18(2):481. doi: 10.3390/s18020481.

Abstract

This paper presents a novel methodology for detecting the gait phase of human walking on level ground. The previous threshold method (TM) sets a threshold to divide the ground contact forces (GCFs) into on-ground and off-ground states. However, the previous methods for gait phase detection demonstrate no adaptability to different people and different walking speeds. Therefore, this paper presents a self-tuning triple threshold algorithm (STTTA) that calculates adjustable thresholds to adapt to human walking. Two force sensitive resistors (FSRs) were placed on the ball and heel to measure GCFs. Three thresholds (i.e., high-threshold, middle-threshold andlow-threshold) were used to search out the maximum and minimum GCFs for the self-adjustments of thresholds. The high-threshold was the main threshold used to divide the GCFs into on-ground and off-ground statuses. Then, the gait phases were obtained through the gait phase detection algorithm (GPDA), which provides the rules that determine calculations for STTTA. Finally, the STTTA reliability is determined by comparing the results between STTTA and Mariani method referenced as the timing analysis module (TAM) and Lopez-Meyer methods. Experimental results show that the proposed method can be used to detect gait phases in real time and obtain high reliability when compared with the previous methods in the literature. In addition, the proposed method exhibits strong adaptability to different wearers walking at different walking speeds.

摘要

本文提出了一种新颖的方法来检测人类在平地行走时的步态阶段。以前的阈值方法 (TM) 设置一个阈值将地面接触力 (GCF) 分为着地和离地状态。然而,以前的步态阶段检测方法对不同的人和不同的行走速度没有适应性。因此,本文提出了一种自调整三重阈值算法 (STTTA),该算法计算可调阈值以适应人类行走。两个力敏电阻 (FSR) 放置在球和脚跟处以测量 GCF。使用三个阈值(即高阈值、中阈值和低阈值)来搜索最大和最小 GCF,以进行阈值的自动调整。高阈值是主要的阈值,用于将 GCF 分为着地和离地状态。然后,通过步态阶段检测算法 (GPDA) 获取步态阶段,该算法提供了确定 STTTA 计算的规则。最后,通过将 STTTA 的结果与作为定时分析模块 (TAM) 的 Mariani 方法和 Lopez-Meyer 方法进行比较来确定 STTTA 的可靠性。实验结果表明,与文献中的以前方法相比,该方法可以实时检测步态阶段,并具有较高的可靠性。此外,该方法对不同的穿着者以不同的行走速度行走具有很强的适应性。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/c248/5855005/d54ce99174db/sensors-18-00481-g001.jpg

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验