Department of Materials Science and Engineering, Jinan Univeristy, Guangzhou 510632, China; The First Affiliated Hospital of Jinan University, Guangzhou 510630, China.
Department of Materials Science and Engineering, Jinan Univeristy, Guangzhou 510632, China; School of Mechanics and Construction Engineering, Jinan University, Guangzhou 510632, China.
Carbohydr Polym. 2018 Aug 1;193:1-8. doi: 10.1016/j.carbpol.2018.03.067. Epub 2018 Mar 21.
Poly(L-lactic acid) (PLLA) is a popular biodegradable polymer, but the accumulated acid production by degradation is a bottleneck for its extended utilization. In this study, chitosan microspheres (CSMs) were introduced into PLLA porous matrices to manipulate the acid microclimate from PLLA degradation. In vitro and in vivo degradation were, respectively, performed in PBS and implanted into rat's subcutaneous. The results indicated that pH of CSMs/PLLA composites remained stable of around 7.50 in vitro until six weeks. With the increasing of CSMs, mass loss, water absorption of the composites increased, while Mv of PLLA decreased during in vitro test. Furthermore, CSMs/PLLA composites degradation in vivo could be speeded by the introduction of CSMs via obvious morphological destroy under H&E staining observation. These results indicated that incorporation of CSMs not only buffered the acidic microclimate but also improved the degradation of PLLA. The tunable degradation behavior and moderate degradation microclimate of CSMs/PLLA composites developed in the study would provide benefits for its biomedical application.
聚(L-乳酸)(PLLA)是一种很受欢迎的可生物降解聚合物,但降解产生的积累酸是其广泛应用的瓶颈。在这项研究中,壳聚糖微球(CSMs)被引入 PLLA 多孔基质中,以控制 PLLA 降解产生的酸性微环境。分别在 PBS 中和植入大鼠皮下进行体外和体内降解。结果表明,体外六周内,CSMs/PLLA 复合材料的 pH 值稳定在 7.50 左右。随着 CSMs 的增加,复合材料的质量损失和吸水率增加,而 PLLA 的 Mv 在体外测试中降低。此外,通过 H&E 染色观察到明显的形态破坏,CSMs 的引入加速了 CSMs/PLLA 复合材料在体内的降解。这些结果表明,CSMs 的掺入不仅缓冲了酸性微环境,而且改善了 PLLA 的降解。本研究中开发的 CSMs/PLLA 复合材料的可调降解行为和适度的降解微环境将有益于其在生物医学中的应用。