College of Basic Medicine & Clinical Medical College & Affiliated Hospital of Chengdu University, Chengdu, 610106, China.
Department of Orthopedics, The First People's Hospital of Chengdu, Chengdu, 610000, China.
Sci Rep. 2021 Feb 19;11(1):4283. doi: 10.1038/s41598-021-83941-3.
Nowadays, artificial bone materials have been widely applied in the filling of non-weight bearing bone defects, but scarcely ever in weight-bearing bone defects. This study aims to develop an artificial bone with excellent mechanical properties and good osteogenic capability. Firstly, the collagen-thermosensitive hydrogel-calcium phosphate (CTC) composites were prepared as follows: dissolving thermosensitive hydrogel at 4 °C, then mixing with type I collagen as well as tricalcium phosphate (CaP) powder, and moulding the composites at 37 °C. Next, the CTC composites were subjected to evaluate for their chemical composition, micro morphology, pore size, Shore durometer, porosity and water absorption ability. Following this, the CTC composites were implanted into the muscle of mice while the 70% hydroxyapatite/30% β-tricalcium phosphate (HA/TCP) biomaterials were set as the control group; 8 weeks later, the osteoinductive abilities of biomaterials were detected by histological staining. Finally, the CTC and HA/TCP biomaterials were used to fill the large segments of tibia defects in mice. The bone repairing and load-bearing abilities of materials were evaluated by histological staining, X-ray and micro-CT at week 8. Both the CTC and HA/TCP biomaterials could induce ectopic bone formation in mice; however, the CTC composites tended to produce larger areas of bone and bone marrow tissues than HA/TCP. Simultaneously, bone-repairing experiments showed that HA/TCP biomaterials were easily crushed or pushed out by new bone growth as the material has a poor hardness. In comparison, the CTC composites could be replaced gradually by newly formed bone and repair larger segments of bone defects. The CTC composites trialled in this study have better mechanical properties, osteoinductivity and weight-bearing capacity than HA/TCP. The CTC composites provide an experimental foundation for the synthesis of artificial bone and a new option for orthopedic patients.
如今,人造骨材料已广泛应用于非承重骨缺损的填充,但很少用于承重骨缺损。本研究旨在开发一种具有优异力学性能和良好成骨能力的人造骨。首先,制备胶原-温敏水凝胶-磷酸钙(CTC)复合材料:将温敏水凝胶在 4°C 下溶解,然后与 I 型胶原和磷酸三钙(CaP)粉末混合,在 37°C 下成型复合材料。接下来,对 CTC 复合材料的化学成分、微观形貌、孔径、肖氏硬度、孔隙率和吸水率进行评估。随后,将 CTC 复合材料植入小鼠肌肉中,将 70%羟基磷灰石/30%β-磷酸三钙(HA/TCP)生物材料作为对照组;8 周后,通过组织学染色检测生物材料的成骨能力。最后,用 CTC 和 HA/TCP 生物材料填充小鼠大段胫骨缺损。通过组织学染色、X 射线和微 CT 评估第 8 周时材料的骨修复和承载能力。CTC 和 HA/TCP 生物材料均可在小鼠体内诱导异位骨形成,但 CTC 复合材料比 HA/TCP 更倾向于产生更大面积的骨和骨髓组织。同时,骨修复实验表明,由于材料硬度较差,HA/TCP 生物材料容易被新骨生长压碎或推出。相比之下,新形成的骨可以逐渐替代 CTC 复合材料,修复更大的骨缺损段。本研究中试用的 CTC 复合材料具有比 HA/TCP 更好的力学性能、成骨活性和承重能力。CTC 复合材料为人造骨的合成提供了实验基础,为骨科患者提供了新的选择。