Centre for the Cellular Microenvironment, University of Glasgow, Glasgow, UK.
Centre for the Cellular Microenvironment, University of Glasgow, Glasgow, UK.
Acta Biomater. 2018 Sep 1;77:74-84. doi: 10.1016/j.actbio.2018.07.016. Epub 2018 Jul 10.
Extracellular matrix (ECM) proteins are key mediators of cell/material interactions. The surface density and conformation of these proteins adsorbed on the material surface influence cell adhesion and the cellular response. We have previously shown that subtle variations in surface chemistry lead to drastic changes in the conformation of adsorbed fibronectin (FN). On poly(ethyl acrylate) (PEA), FN unfolds and displays domains for cell adhesion and FN-FN interaction, whereas on poly(methyl acrylate) (PMA) - with only one methyl group less - FN remains globular as it is in solution. The effect of the strength of the protein/material interaction in cell response, and its relation to protein density and conformation, has received limited attention so far. In this work, we used FN-functionalized AFM cantilevers to evaluate, via force spectroscopy, the strength of interaction between fibronectin and the underlying polymer which controls FN conformation (PEA and PMA). We found that the strength of FN/PEA interaction is significantly higher than FN/PMA, which limits the mobility of FN layer on PEA, reduces the ability of cells to mechanically reorganize FN and then leads to enhanced proteolysis and degradation of the surrounding matrix with compromised cell viability. By contrast, both PEA and PMA support cell adhesion when FN density is increased and also in the presence of serum or other serum proteins, including vitronectin (VN) and bovine serum albumin (BSA), which provide a higher degree of mobility to the matrix.
The identification of parameters influencing cell response is of paramount importance for the design of biomaterials that will act as synthetic scaffolds for cells to anchor, grow and, eventually, become specialised tissues. Cells interact with materials through an intermediate layer of proteins adsorbed on the material surface. It is known that the density and conformation of these proteins determine cell behaviour. Here we show that the strength of protein/material interactions, which has received very limited attention so far, is key to understand the cellular response to biomaterials. Very strong protein/material interactions reduce the ability of cells to mechanically reorganize proteins at the material interface which results in enhanced matrix degradation, leading ultimately to compromised cell viability.
细胞外基质 (ECM) 蛋白是细胞/材料相互作用的关键介质。这些吸附在材料表面的蛋白的表面密度和构象影响细胞黏附以及细胞反应。我们之前已经表明,表面化学的细微变化会导致吸附纤维连接蛋白 (FN) 的构象发生巨大变化。在聚 (丙烯酸乙酯) (PEA) 上,FN 展开并显示出用于细胞黏附和 FN-FN 相互作用的结构域,而在聚 (甲基丙烯酸甲酯) (PMA) 上——只少了一个甲基——FN 仍然保持球形,就像在溶液中一样。迄今为止,蛋白/材料相互作用的强度在细胞反应中的作用及其与蛋白密度和构象的关系受到了有限的关注。在这项工作中,我们使用 FN 功能化的原子力显微镜悬臂通过力谱法评估纤维连接蛋白与控制 FN 构象的底层聚合物(PEA 和 PMA)之间的相互作用强度。我们发现 FN/PEA 相互作用的强度明显高于 FN/PMA,这限制了 FN 层在 PEA 上的流动性,降低了细胞机械重排 FN 的能力,随后导致周围基质的蛋白水解和降解增强,细胞活力受损。相比之下,当 FN 密度增加时,PEA 和 PMA 都支持细胞黏附,并且在存在血清或其他血清蛋白(包括 vitronectin (VN) 和牛血清白蛋白 (BSA))时也是如此,这些蛋白为基质提供了更高的流动性。
确定影响细胞反应的参数对于设计作为细胞附着、生长并最终成为专门组织的合成支架的生物材料至关重要。细胞通过吸附在材料表面的中间层蛋白与材料相互作用。已知这些蛋白的密度和构象决定了细胞行为。在这里,我们表明,迄今为止受到非常有限关注的蛋白/材料相互作用的强度是理解细胞对生物材料反应的关键。非常强的蛋白/材料相互作用降低了细胞机械重排材料界面处蛋白的能力,导致基质降解增强,最终导致细胞活力受损。