Robotics Laboratory, Brady Urological Institute, Johns Hopkins University, Baltimore, MD, USA.
Sheikh Zayed Institute for Pediatric Surgical Innovation, Children's National Health System, 111 Michigan Avenue, Washington, DC, USA.
Int J Comput Assist Radiol Surg. 2019 Jan;14(1):147-156. doi: 10.1007/s11548-018-1889-1. Epub 2018 Nov 19.
We have designed and constructed an MR-safe robot made entirely of nonmetallic components with pneumatic actuators and optical encoders. The robot was developed to enable bone biopsies to be performed under magnetic resonance imaging (MRI) guidance in pediatric patients. The purpose of this study was to show the feasibility of using the robot for biopsy of the femur and tibia in a cadaver leg. Our long-term goal is to eliminate radiation exposure during bone biopsy procedures and provide more timely and accurate diagnosis for children with bone cancers and bone infections.
The MR-safe robot was mounted on the MRI table. A cadaver leg was procured from an anatomy supply house and placed on the MRI table. All required hospital precautions for infection control were taken. A total of 10 biopsy targets were sampled using MRI guidance: five from the femur and five from the tibia. A handheld, commercially available battery-powered bone drill was used to facilitate drilling through the cortex. After the study, the leg was scanned with CT to better visualize and document the bone biopsy sites. Both the MRI and CT images were used to analyze the results.
All of the targets were successfully reached with an average targeting accuracy of 1.43 mm. A workflow analysis showed the average time for the first biopsy was 41 min including robot setup time and 22 min for each additional biopsy including the time for the repeat MRI scan used to confirm accurate targeting. The robot was shown to be MRI transparent, as no image quality degradation due to the use of the robot was detected.
The results showed the feasibility of using an MR-safe robotic system to assist the interventional radiologist in performing precision bone biopsy under MRI guidance. Future work will include developing an MR-safe drill, improving the mounting of the robot and fixation of the leg, and moving toward first in child clinical trials.
我们设计并构建了一种完全由非金属部件组成的、带气动执行器和光学编码器的磁共振安全机器人。该机器人的开发目的是在磁共振成像(MRI)引导下为儿科患者进行骨活检。本研究的目的是展示在尸体腿上使用机器人进行股骨和胫骨活检的可行性。我们的长期目标是消除骨活检过程中的辐射暴露,为患有骨癌和骨感染的儿童提供更及时、更准确的诊断。
MR 安全机器人安装在 MRI 检查台上。从解剖供应商处购买了一条尸体腿,并放在 MRI 检查台上。采取了所有必要的医院感染控制预防措施。使用 MRI 引导共采集了 10 个活检目标:5 个来自股骨,5 个来自胫骨。使用手持式、市售的电池供电骨钻来协助钻透皮质。研究结束后,用 CT 扫描腿,以更好地可视化和记录骨活检部位。使用 MRI 和 CT 图像来分析结果。
所有目标均成功到达,平均靶向精度为 1.43 毫米。工作流程分析显示,第一次活检的平均时间为 41 分钟,包括机器人设置时间,每次额外活检的平均时间为 22 分钟,包括用于确认准确靶向的重复 MRI 扫描时间。机器人被证明是 MRI 透明的,因为没有检测到由于使用机器人而导致的图像质量下降。
结果表明,使用磁共振安全机器人系统辅助介入放射科医生在 MRI 引导下进行精确骨活检是可行的。未来的工作将包括开发磁共振安全钻头、改进机器人的安装和腿部固定,并朝着首次儿童临床试验的方向发展。