School of Physical Science and Technology, Center for Energy Conversion Materials & Physics (CECMP), Jiangsu Key Laboratory of Thin Films, Soochow University, Suzhou, 215006, P. R. China.
Adv Mater. 2019 Mar;31(12):e1806725. doi: 10.1002/adma.201806725. Epub 2019 Jan 30.
Self-powered photodetectors are highly desired to meet the great demand in applications of sensing, communication, and imaging. Manipulating the carrier separation and recombination is critical to achieve high performance. In this paper, a self-powered photodetector based on the integrated gradient O-doped CdS nanorod array and perovskite is presented. Through optimizing the degree of continuous built-in band bending in the gradient-O CdS, the photodetector demonstrates a remarkable detectivity of 2.1 × 10 Jones. Under the self-powered voltage mode, the responsivity can be as high as 0.48 A W , and the rise and decay time are 0.54/2.21 ms. The comprehensive performance is comparable and even better than reported perovskite and other types of self-powered photodetectors. The improved mechanism reveals that the gradient band bending promotes the photogenerated carrier transfer and hinders the recombination at the interface.
自供电光电探测器在传感、通信和成像等应用领域的需求巨大,因此人们非常希望能够获得自供电光电探测器。操纵载流子的分离和复合对于实现高性能至关重要。本文提出了一种基于集成梯度 O 掺杂 CdS 纳米棒阵列和钙钛矿的自供电光电探测器。通过优化梯度-O CdS 中的内置能带弯曲程度,该光电探测器表现出了显著的探测率,达到了 2.1×10 琼斯。在自供电电压模式下,响应率高达 0.48 A W ,上升和下降时间分别为 0.54/2.21 ms。综合性能可与已报道的钙钛矿和其他类型的自供电光电探测器相媲美,甚至更好。改进的机制表明,梯度能带弯曲促进了光生载流子的转移,并阻碍了界面处的复合。