Klapcsik Kálmán, Hegedűs Ferenc
Budapest University of Technology and Economics, Faculty of Mechanical Engineering, Department of Hydrodynamic Systems, P.O. Box 91, 1521 Budapest, Hungary.
Ultrason Sonochem. 2019 Jun;54:256-273. doi: 10.1016/j.ultsonch.2019.01.031. Epub 2019 Jan 26.
The effect of dissipation on the shape stability of a harmonically excited bubble is investigated. The employed liquid is the highly viscous glycerine. The rate of the dissipation is controlled through the alteration of viscosity of the liquid by varying its temperature. The mean radius of the bubble during its radial oscillation is described by the Keller-Miksis equation. Two approaches are used to describe the surface oscillations. The first model solves the surface dynamics equations of each mode together with the transport equation of the vorticity in the liquid domain. The second model approximates the transport equation, which is a partial differential equation, with a boundary layer approximation reducing the required computational resources significantly. The comparison of the surface models shows qualitative agreement at low dissipation rate; however, at high viscosity the application of the full transport equation is mandatory. The results show that an increasing rate of dissipation can significantly extend the shape stable domains in the excitation frequency-pressure amplitude parameter plane. Nevertheless, the collapse strength is decreasing due to the highly damped oscillations. It has been found that an optimal range of dissipation rate in terms of temperature can be defined expressing a good compromise between the collapse strength and surface stability. The computations are carried out by an in-house GPU accelerated initial value problem solver.
研究了耗散对简谐激励气泡形状稳定性的影响。所使用的液体是高粘性甘油。通过改变液体温度来改变其粘度,从而控制耗散速率。气泡径向振荡期间的平均半径由凯勒 - 米克西斯方程描述。采用两种方法来描述表面振荡。第一种模型将各模式的表面动力学方程与液体内域的涡度输运方程联立求解。第二种模型用边界层近似法对作为偏微分方程的输运方程进行近似,显著减少了所需的计算资源。表面模型的比较表明,在低耗散率下两者定性一致;然而,在高粘度情况下,必须应用完整的输运方程。结果表明,耗散率的增加可显著扩展激励频率 - 压力振幅参数平面中的形状稳定域。不过,由于振荡的高度阻尼,坍塌强度在降低。已发现可以定义一个关于温度的最佳耗散率范围,该范围在坍塌强度和表面稳定性之间实现了良好的折衷。计算由内部GPU加速的初值问题求解器进行。