School of Geography, Earth and Environmental Sciences, Plymouth University, Drake Circus, Plymouth PL4 8AA, UK.
Rame Peninsula Beach Care, 56 Fore Street, Kingsand, Torpoint PL10 1NA, UK.
Sci Total Environ. 2019 May 10;664:938-947. doi: 10.1016/j.scitotenv.2019.01.281. Epub 2019 Feb 3.
Primary microplastics have been collected from 17 beaches along the Atlantic, English Channel and southern North Sea coasts of western Europe. Based on visual characteristics, these plastics were differentiated as either relatively smooth, lentil- or disc-shaped pre-production pellets (or nurdles), which were usually a few mm in diameter and were mainly white to off-white, or rougher and more irregular pellets that were slightly larger and usually black. The latter appeared to be bio-beads, or plastics that are specifically manufactured for use as biomedia in certain sewage water treatment (SWT) plants and, possibly, in other industrial wastewater treatment applications. Identification of bio-beads was confirmed following the acquisition of identical samples from a SWT plant in southwest England and a French supplier of bio-beads. Infrared and x-ray fluorescence analysis revealed that bio-beads have, at least historically, been constructed of plasticised polyethylene and, unlike pre-production pellets, contained variable quantities of potentially toxic elements: Br, Cd, Cr, Hg, Pb and Sb; with a distinctive Br to Sb ratio indicative of brominated flame retardants and antimony-based retardant synergists. It is asserted that bio-beads have been manufactured from a heterogeneous mix of recycled polyethylene and end-of-life electrical and electronic plastic, with concentrations of Br, Cd, Cr or Pb in about 50 bio-beads (out of 497 analysed) non-compliant or potentially non-compliant with respect to current regulations on hazardous plastic waste. Concentrations of Br, Cd, Cr, Pb and Sb extracted from individual bio-beads by a simulated avian digestive fluid were variable, with maximum values of about 14, 0.8, 1.3, 20 and 1.4 μg g, respectively. The presence and, in many cases, dominance of bio-beads among beached primary microplastics is discussed with regard to the classification of microplastics and potential impacts on wildlife.
已从西欧大西洋、英吉利海峡和北海南海岸的 17 个海滩收集到初级微塑料。根据视觉特征,这些塑料可分为相对光滑、扁豆形或盘形的预生产颗粒(或 nurdles),其直径通常为数毫米,主要为白色到灰白色,或者更粗糙和不规则的颗粒,稍大,通常为黑色。后者似乎是生物珠,或专门制造用于某些污水处理 (SWT) 厂和其他工业废水处理应用中的生物介质的塑料。在从英格兰西南部的一个 SWT 工厂和一个法国生物珠供应商获得相同的样本后,确认了生物珠的身份。红外和 X 射线荧光分析表明,生物珠至少在历史上是由增塑聚乙烯制成的,与预生产颗粒不同,它们含有不同数量的潜在有毒元素:Br、Cd、Cr、Hg、Pb 和 Sb;Br 与 Sb 的比值表明存在溴化阻燃剂和基于锑的阻燃增效剂。据称,生物珠是由回收聚乙烯和报废的电气和电子产品塑料的混合制成的,在大约 50 个生物珠(分析了 497 个)中,Br、Cd、Cr 或 Pb 的浓度不符合或可能不符合当前有关危险塑料废物的法规。通过模拟鸟类消化液从单个生物珠中提取的 Br、Cd、Cr、Pb 和 Sb 的浓度是可变的,最大值分别约为 14、0.8、1.3、20 和 1.4μg/g。讨论了海滩初级微塑料中生物珠的存在和(在许多情况下)主导地位,以及它们对野生动物的潜在影响。