Department of Sustainability-CR Portici, Italian National Agency for New Technologies, Energy and Sustainable Economic Development (ENEA), P. Enrico Fermi, 1, 80055 Portici (NA), Italy.
Department of Sustainability-CR Trisaia, Italian National Agency for New Technologies, Energy and Sustainable Economic Development (ENEA), SS Jonica 106, km 419+500, 75026 Rotondella (MT), Italy.
Molecules. 2019 Feb 21;24(4):782. doi: 10.3390/molecules24040782.
Microalgae contains useful molecules such as β-carotene and fatty acids (FAs), which are considered high value-added compounds. To extract these molecules, supercritical carbon dioxide was used at different operative conditions. The effects of mechanical pre-treatment (grinding speed at 0⁻600 rpm; pre-treatment time of 2.5⁻7.5 min) and operating parameters for extraction, such as biomass loading (2.45 and 7.53 g), pressure (100⁻550 bars), temperature (50⁻75 °C) and CO₂ flow rate (7.24 and 14.48 g/min) by varying the extraction times (30⁻110 min) were evaluated. Results showed that the maximum cumulative recovery (25.48%) of β-carotene was achieved at 400 bars and 65 °C with a CO₂ flow rate of 14.48 g/min, while the highest purity for stage (55.40%) was attained at 550 bars and 65 °C with a CO₂ flow rate of 14.48 g/min. The maximum recovery of FAs, equal to 8.47 mg/g, was achieved at 550 bars and 75 °C with a CO₂ flow rate of 14.48 g/min. Moreover, the lowest biomass loading (2.45 g) and the first extraction cycle (30 min) allowed the maximum extraction of β-carotene and FAs.
微藻含有有用的分子,如β-胡萝卜素和脂肪酸(FAs),这些被认为是高附加值的化合物。为了提取这些分子,使用超临界二氧化碳在不同的操作条件下进行。考察了机械预处理(研磨速度为 0⁻600 rpm;预处理时间为 2.5⁻7.5 min)和操作参数(生物量加载量为 2.45 和 7.53 g、压力为 100⁻550 bar、温度为 50⁻75°C 和 CO₂流速为 7.24 和 14.48 g/min)对提取时间(30⁻110 min)的影响。结果表明,β-胡萝卜素的最大累积回收率(25.48%)在 400 bar 和 65°C、CO₂流速为 14.48 g/min 时达到,而在 550 bar 和 65°C、CO₂流速为 14.48 g/min 时达到 55.40%的最高纯度。FAs 的最大回收率为 8.47 mg/g,在 550 bar 和 75°C、CO₂流速为 14.48 g/min 时达到。此外,最低的生物量加载量(2.45 g)和第一个提取循环(30 min)允许β-胡萝卜素和 FAs 的最大提取。