Department of Biotechnology, St. Joseph's College of Engineering, Chennai 6000119, India.
Department of Biotechnology, St. Joseph's College of Engineering, Chennai 6000119, India.
Bioresour Technol. 2019 Jun;281:234-238. doi: 10.1016/j.biortech.2019.02.101. Epub 2019 Feb 23.
In the present work, Ulva lactuca, a marine macroalgae was used for the production of biodiesel. The ultrasound assisted extraction of oil from autoclaved algal biomass was found effective with maximum yield. The maximum oil was extracted at optimal conditions of 5% moisture content of algal biomass, 0.15 mm size of biomass, 6:1 solvent: solid ratio, at 55 °C in 140 min. The n-hexane with co-solvent methyl tertbutyl ether has shown higher oil when compared to other co-solvents. The extracted oil was transesterified into biodiesel using silica doped with zinc oxide as novel heterogeneous nanocatalyst. The maximum biodiesel yield of 97.43% was obtained at optimized conditions of 800 °C calcination temperature, 8% catalyst concentration, 9:1 methanol to oil ratio, 55 °C reaction temperature and 50 min reaction time. The kinetics of the transesterification reaction was also studied. The Ulva lactuca was found as a potential source for biodiesel production.
在本工作中,我们使用海洋大型藻类石莼来生产生物柴油。发现超声辅助提取高压灭菌藻类生物质中的油是有效的,产率最高。在最佳条件下,即藻类生物质的 5%水分含量、0.15 毫米的生物质粒径、6:1 的溶剂:固比、55°C 下提取 140 分钟,可获得最大的油产量。与其他共溶剂相比,正己烷与甲基叔丁基醚的共溶剂显示出更高的油产量。用掺杂氧化锌的二氧化硅作为新型非均相纳米催化剂将提取的油进行酯交换转化为生物柴油。在最佳条件下,即 800°C 的煅烧温度、8%的催化剂浓度、9:1 的甲醇与油的比例、55°C 的反应温度和 50 分钟的反应时间,可获得 97.43%的最大生物柴油产率。还研究了酯交换反应的动力学。石莼被认为是生产生物柴油的潜在来源。