Dong Yibo, Cheng Chuantong, Xu Chen, Mao Xurui, Xie Yiyang, Chen Hongda, Huang Beiju, Zhao Yongdong, Deng Jun, Guo Weiling, Pan Guanzhong, Sun Jie
Key Laboratory of Optoelectronics Technology, College of Microelectronics , Beijing University of Technology , Beijing 100124 , China.
State Key Laboratory of Integrated Optoelectronics, Institute of Semiconductors , Chinese Academy of Sciences , Beijing 100083 , China.
ACS Appl Mater Interfaces. 2019 Apr 17;11(15):14427-14436. doi: 10.1021/acsami.9b00124. Epub 2019 Apr 4.
A metal-catalyst-free method for the direct growth of patterned graphene on an insulating substrate is reported in this paper. Parylene N is used as the carbon source. The surface molecule layer of parylene N is cross-linked by argon plasma bombardment. Under high-temperature annealing, the cross-linking layer of parylene N is graphitized into nanocrystalline graphene, which is a process that transforms organic to inorganic and insulation to conduction, while the parylene N molecules below the cross-linking layer decompose and vaporize at high temperature. Using this technique, the direct growth of a graphene film in a large area and with good uniformity is achieved. The thickness of the graphene is determined by the thickness of the cross-linking layer. Patterned graphene films can be obtained directly by controlling the patterns of the cross-linking region (lithography-free patterning). Graphene-silicon Schottky junction photodetectors are fabricated using the as-grown graphene. The Schottky junction shows good performance. The application of direct-grown graphene in optoelectronics is achieved with a great improvement of the device fabrication efficiency compared with transferred graphene. When illuminated with a 792 nm laser, the responsivity and specific detectivity of the detector measured at room temperature are 275.9 mA/W and 4.93 × 10 cm Hz/W, respectively.
本文报道了一种在绝缘衬底上直接生长图案化石墨烯的无金属催化剂方法。聚对二甲苯N用作碳源。聚对二甲苯N的表面分子层通过氩等离子体轰击交联。在高温退火下,聚对二甲苯N的交联层被石墨化为纳米晶石墨烯,这是一个从有机到无机、从绝缘到导电的转变过程,而交联层下方的聚对二甲苯N分子在高温下分解并汽化。利用该技术,实现了大面积且均匀性良好的石墨烯薄膜的直接生长。石墨烯的厚度由交联层的厚度决定。通过控制交联区域的图案(无光刻图案化)可直接获得图案化的石墨烯薄膜。使用生长的石墨烯制备了石墨烯-硅肖特基结光电探测器。该肖特基结表现出良好的性能。与转移石墨烯相比,直接生长的石墨烯在光电子学中的应用极大地提高了器件制造效率。当用792 nm激光照射时,在室温下测量的探测器的响应度和比探测率分别为275.9 mA/W和4.93×10 cm Hz/W。