Szijarto L F, Barnum D A
Ontario Ministry of Agriculture and Food, Central Milk testing Laboratory, 240 York Road, Guelph, Ontario N1G 2W1 and Department of Veterinary Microbiology and Immunology, Ontario Veterinary College, University of Guelph, Guelph, Ontario N1G 2W1, Canada.
J Food Prot. 1984 Mar;47(3):227-231. doi: 10.4315/0362-028X-47.3.227.
Special standards for Somatic Cell Counting (SCC) were developed at the Central Milk Testing Laboratory in Guelph for Ontario laboratories performing the tests. One laboratory used a Coulter milk counter for composite herd samples, two laboratories used five Fossomatic counters for cow samples, while the fourth used a Coulter counter for research purposes. Standards were prepared at low, medium and high count levels from fresh herd milks containing somatic cells near levels of 100,000, 500,000 and 1,000,000/ml. As the lifespan of the suspensions of somatic cells was three months, they were prepared in sufficient quantities to test daily for 3 months, and to be used throughout the day for calibration maintenance. The actual counts in the standards were established by direct microscopic somatic cell count (DMSCC) performed in two laboratories simultaneously with exchange of slides. Counts were re-confirmed every week by the same DMSCC procedures. The standards are suitable for initial calibration, daily calibration maintenance, daily instrument performance appraisal and trouble-shooting. In daily use each laboratory tests each standard five times each morning on each instrument. The same vials are used throughout the day, every 0.5 h for appraisal of continuous calibration and instrument function. The mean and standard deviations of standards are determined and compiled for each day.
圭尔夫市的中央牛奶检测实验室为安大略省进行体细胞计数(SCC)检测的实验室制定了特殊标准。一个实验室使用库尔特牛奶计数器检测混合牛群样本,两个实验室使用五台福斯马蒂克计数器检测奶牛样本,而第四个实验室使用库尔特计数器用于研究目的。标准品是从体细胞含量接近100,000、500,000和1,000,000个/毫升的新鲜牛群牛奶中,按照低、中、高计数水平制备的。由于体细胞悬液的保质期为三个月,所以制备了足够的量,以便每天进行检测,持续3个月,并在一整天内用于校准维护。标准品中的实际计数通过在两个实验室同时进行的直接显微镜体细胞计数(DMSCC)并交换载玻片来确定。每周通过相同的DMSCC程序重新确认计数。这些标准品适用于初始校准、每日校准维护、每日仪器性能评估和故障排除。在日常使用中,每个实验室每天早上在每台仪器上对每个标准品进行五次检测。一整天都使用相同的小瓶,每0.5小时进行一次检测,以评估连续校准和仪器功能情况。每天都会确定并汇编标准品的平均值和标准差。