Morales-Burgos Ana M, Carvajal-Millan Elizabeth, López-Franco Yolanda L, Rascón-Chu Agustín, Lizardi-Mendoza Jaime, Sotelo-Cruz Norberto, Brown-Bojórquez Francisco, Burgara-Estrella Alexel, Pedroza-Montero Martin
Research Center for Food and Development, CIAD, A.C. Carretera a La Victoria Km. 0.6, Hermosillo, Sonora 83304, Mexico.
Department of Medicine, University of Sonora, Rosales y Blvd. Luis D. Colosio, Hermosillo, Sonora 83000, Mexico.
Polymers (Basel). 2017 May 5;9(5):164. doi: 10.3390/polym9050164.
Arabinoxylans (AXs) with high ferulic acid (FA) content (7.18 µg/mg AXs) were cross-linked using laccase. Storage (') modulus of AX solutions at 1% (AX-1) and 2% (AX-2) (/) registered maximum values of 409 Pa and 889 Pa at 180 min and 83 min, respectively. Atomic force microscopy revealed the grained and irregular surface of the AX-1 gel and the smoother surface without significant depressions of the AX-2 gel. Cured AX gels exhibited a liquid phase surrounding the samples indicating syneresis. The syneresis ratio percentage (% ) of the gels was registered over time reaching stabilization at 20 h. The % was not significantly different between AX-1 (60.0%) and AX-2 (62.8%) gels. After 20 h of syneresis development, the dimers of the FA in the AX-1 and AX-2 gels significantly increased by 9% and 78%, respectively; moreover, the trimers of the FA in the AX-1 and AX-2 gels, by 94% and 300%, respectively. Scanning electron microscopy showed that, after syneresis stabilization, AX gels presented a more compact microstructure. Syneresis development in the gels of highly ferulated AXs could be related to the polymer network contraction due to the additional formation of dimers and trimers of the FA (cross-linking structures), which may act like a "zipping" process, increasing the polymer chains' connectivity.
使用漆酶对阿魏酸(FA)含量高(7.18 µg/mg阿拉伯木聚糖)的阿拉伯木聚糖(AXs)进行交联。1%(AX - 1)和2%(AX - 2)的AX溶液的储能模量在180分钟和83分钟时分别达到最大值409 Pa和889 Pa。原子力显微镜显示AX - 1凝胶表面有颗粒且不规则,而AX - 2凝胶表面更光滑,没有明显凹陷。固化后的AX凝胶在样品周围呈现出液相,表明有脱水收缩现象。凝胶的脱水收缩率百分比随时间记录,在20小时达到稳定。AX - 1(60.0%)和AX - 2(62.8%)凝胶之间的脱水收缩率百分比没有显著差异。在脱水收缩20小时后,AX - 1和AX - 2凝胶中FA的二聚体分别显著增加了9%和78%;此外,AX - 1和AX - 2凝胶中FA的三聚体分别增加了94%和300%。扫描电子显微镜显示,在脱水收缩稳定后,AX凝胶呈现出更致密的微观结构。高阿魏酸化AXs凝胶中的脱水收缩现象可能与由于FA二聚体和三聚体(交联结构)的额外形成导致的聚合物网络收缩有关,这可能类似于一个“拉链”过程,增加了聚合物链的连接性。