National Center on Complex Processing of Mineral Raw Material of the Republic of Kazakhstan RSE, Almaty 050036, Kazakhstan.
Chuiko Institute of Surface Chemistry National Academy of Sciences of Ukraine, Kiyv 03164, Ukraine.
Molecules. 2019 Aug 24;24(17):3075. doi: 10.3390/molecules24173075.
Lignin processing products have an extensive using range. Because products properties depend on lignin precursor quality it was interesting to study lignin isolated from rice husk being a large tonnage waste of rice production and its structural transformations during carbonization. Lignin isolated by the thermal hydrolysis method with HSO 1 wt % solution and its carbonized products prepared under different carbonization conditions were characterized using elemental analysis, IR, TPD-MS, XRD, TEM, and EPR. It was shown lignin degradation takes place over the wide (220-520 °C) temperature range. Silica presenting in lignin affects the thermal destruction of this polymer. Due to the strong chemical bond with phenolic hydroxylic group it decreases an evaporation of volatile compounds and as a result increases the temperature range of the lignin degradation. Rice husk hydrolytic lignin transformations during carbonization occur with generation of free radicals. Their concentration is decreased after condensation of aromatic rings with carbon polycycles formation, i.e., the graphite-like structure. Quantity and X-ray diffraction characteristics of the graphite-like phase depend on carbonization conditions. Morphology of the lignin-based carbonized products is represented by carbon fibers, carbon and silica nanoparticles, and together with another structure characteristics provides prospective performance properties of lignin-based end products.
木质素加工产品的应用范围很广。由于产品性能取决于木质素前体的质量,因此研究水稻秸秆中木质素的结构转化很有趣,因为水稻秸秆是水稻生产的大量废弃物。采用 1wt%HSO4 热水解法从水稻秸秆中分离出木质素,并在不同碳化条件下对其碳化产物进行了元素分析、IR、TPD-MS、XRD、TEM 和 EPR 等表征。结果表明,木质素的降解发生在较宽的(220-520°C)温度范围内。木质素中存在的硅会影响这种聚合物的热破坏。由于与酚羟基的强化学键,它减少了挥发性化合物的蒸发,从而增加了木质素降解的温度范围。在碳化过程中,水稻秸秆水解木质素发生转化,产生自由基。在芳环与碳多环形成缩合后,自由基的浓度降低,即形成类石墨结构。类石墨相的数量和 X 射线衍射特征取决于碳化条件。基于木质素的碳化产物的形态由碳纤维、碳和硅纳米颗粒组成,与其他结构特征一起提供了基于木质素的最终产品的有前景的性能特性。