Kawai Satomi, Niwano Masanori, Sato Masayuki
Environmental Health Science Laboratory, Sumitomo Chemical Co., Ltd., 3-1-98, Kasugadenaka, Konohana-ku, Osaka, 554-8558, Japan.
Heliyon. 2019 Aug 7;5(8):e02165. doi: 10.1016/j.heliyon.2019.e02165. eCollection 2019 Aug.
The safety of nanomaterials is still being debated and the risk should be assessed using the latest available information. As for poorly soluble low toxic (PSLT) nanomaterials, the US National Institute for Occupational Safety and Health estimated the occupational exposure limit (OEL) for titanium dioxide (TiO) based on a particle surface area (SA) metric. The Organisation for Economic Co-operation and Development (OECD) suggested a tiered exposure assessment approach. This article proposes a risk assessment framework for self-management of PSLT particles. Lung burden (described in SA units), which had positive correlation with low observed adverse effect levels for PSLT particles, is chosen as the dose metric. In-house OEL is determined for individual workplaces. For materials with limited data, we suggest evaluating in-house OEL by utilizing the no observed adverse effect level (NOAEL) for TiO, as a representative PSLT nanomaterial. As for the exposure assessment, workplace concentration is first measured with simple equipment (ex. optical particle counter, OPC), and respirator performance is taken into account if it is unavoidable as a last resort. This framework enables efficient risk assessment for PSLT particles by assuming worst cases for each step, and considering the particle characteristics and operational conditions in each workplace.
纳米材料的安全性仍在讨论中,应使用最新可得信息对风险进行评估。至于难溶性低毒(PSLT)纳米材料,美国国家职业安全与健康研究所基于颗粒表面积(SA)指标估算了二氧化钛(TiO)的职业接触限值(OEL)。经济合作与发展组织(OECD)提出了一种分层接触评估方法。本文提出了一种PSLT颗粒自我管理的风险评估框架。选择与PSLT颗粒低观察到的不良反应水平呈正相关的肺负荷(以SA单位描述)作为剂量指标。为各个工作场所确定内部OEL。对于数据有限的材料,我们建议通过利用TiO(作为代表性的PSLT纳米材料)的未观察到不良反应水平(NOAEL)来评估内部OEL。至于接触评估,首先使用简单设备(如光学粒子计数器,OPC)测量工作场所浓度,如果万不得已必须使用呼吸器,则要考虑其性能。该框架通过对每个步骤假设最坏情况,并考虑每个工作场所的颗粒特性和操作条件,实现对PSLT颗粒的高效风险评估。