Heat Generation at the Implant-Bone Interface by Insertion of Ceramic and Titanium Implants.

PURPOSE

The aim of this study is to record material- and surface-dependent heat dissipation during the process of inserting implants into native animal bone.

MATERIALS AND METHODS

Implants made of titanium and zirconium that were identical in macrodesign were inserted under controlled conditions into a bovine rib tempered to 37 °C. The resulting surface temperature was measured on two bone windows by an infrared camera. The results of the six experimental groups, ceramic machined (1), sandblasted (2), and sandblasted and acid-etched surfaces (3) versus titanium implants with the corresponding surfaces (4, 5, and 6) were statistically tested.

RESULTS

The average temperature increase, 3 mm subcrestally at ceramic implants, differed with high statistical significance ( = 7.163 × 10, resulting from group-adjusted linear mixed-effects model) from titanium. The surface texture of ceramic implants shows a statistical difference between group 3 (15.44 ± 3.63 °C) and group 1 (19.94 ± 3.28 °C) or group 2 (19.39 ± 5.73 °C) surfaces. Within the titanium implants, the temperature changes were similar for all surfaces.

CONCLUSION

Within the limits of an in vitro study, the high temperature rises at ceramic versus titanium implants should be limited by a very slow insertion velocity.