采用150纳米厚的聚（3,4-乙撑二氧噻吩）：聚苯乙烯磺酸盐薄膜制备高效平面有机-硅混合太阳能电池
Fabrication of an Efficient Planar Organic-Silicon Hybrid Solar Cell with a 150 nm Thick Film of PEDOT: PSS.
作者信息
Iqbal Sami, Su Dan, Yang Yi, Ullah Fahim, Zhou Huanli, Hussain Azam, Zhang Tong
机构信息
Joint International Research Laboratory of Information Display and Visualization, School of Electronic Science and Engineering, Southeast University, Nanjing 210096, China.
Suzhou Key Laboratory of Metal Nano-Optoelectronic Technology, Suzhou Research Institute of Southeast University, Suzhou 215123, China.
出版信息
Micromachines (Basel). 2019 Sep 26;10(10):648. doi: 10.3390/mi10100648.
Organic-inorganic hybrid solar cells composed of p-type conducting polymer poly (3,4-ethylene-dioxythiophene): polystyrenesulfonate (PEDOT: PSS) and n-type silicon (Si) have gained considerable interest in recent years. From this viewpoint, we present an efficient hybrid solar cell based on PEDOT: PSS and the planar Si substrate (1 0 0) with the simplest and cost-effective experimental procedures. We study and optimize the thickness of the PEDOT: PSS film to improve the overall performance of the device. We also study the effect of ethylene glycol (EG) by employing a different wt % as a solvent in the PEDOT: PSS to improve the device's performance. Silver (Ag) was deposited by electron beam evaporation as the front and rear contacts for the solar cell device. The whole fabrication process was completed in less than three hours. A power conversion efficiency (PCE) of 5.1%, an open circuit voltage (Voc) of 598 mV, and a fill factor (FF) of 58% were achieved.
由p型导电聚合物聚（3,4-乙撑二氧噻吩）：聚苯乙烯磺酸盐（PEDOT：PSS）和n型硅（Si）组成的有机-无机杂化太阳能电池近年来引起了广泛关注。从这个角度出发，我们采用最简单且具有成本效益的实验方法，展示了一种基于PEDOT：PSS和平面硅衬底（1 0 0）的高效杂化太阳能电池。我们研究并优化了PEDOT：PSS薄膜的厚度，以提高器件的整体性能。我们还通过在PEDOT：PSS中使用不同重量百分比的乙二醇（EG）作为溶剂来研究其对器件性能的影响。通过电子束蒸发沉积银（Ag）作为太阳能电池器件的前后接触电极。整个制造过程在不到三小时内完成。实现了5.1%的功率转换效率（PCE）、598 mV的开路电压（Voc）和58%的填充因子（FF）。
Zotero 插件