Two-Dimensional Materials for High-Energy Solid-State Asymmetric Pseudocapacitors with High Mass Loadings.

A porous nanostructure and high mass loading are crucial for a pseudocapacitor to achieve a good electrochemical performance. Although pseudocapacitive materials, such as MnO and MoS , with record capacitances close to their theoretical values have been realized, the achieved capacitances are possible only when the electrode mass loading is less than 1 mg cm . Increasing the mass loading affects the capacitance as electron conduction and ion diffusion become sluggish. Achieving fast ion and electron transport at high mass loadings through all active sites remains a challenge for high-mass-loading electrodes. In this study, 2D MnO nanosheets supported on carbon fibers (MnO @CF) as well as MoS @CF with high mass loadings (6.6 and 7.2 mg cm , respectively) were used in a high-energy pseudocapacitor. These hierarchical 2D nanosheets yielded outstanding areal capacitances of 1187 and 495 mF cm at high current densities with excellent cycling stabilities. A pliable pseudocapacitive solid-state asymmetric supercapacitor was designed using MnO @CF and MoS @CF as the positive and negative electrodes, respectively, with a high mass loading of 14.2 mg cm . The assembled solid-state asymmetric cell had an energy density of 2.305 mWh cm at a power density of 50 mW cm and a capacitance retention of 92.25 % over 11 000 cycles and a very small diffusion resistance (1.72 Ω s ). Thus, it is superior to most state-of-the-art reported pseudocapacitors. The rationally designed nanostructured electrodes with high mass loading are likely to open up new opportunities for the development of a supercapacitor device capable of supplying higher energy and power.