Department of Bioproducts and Biosystems, School of Chemical Engineering, Aalto University, FI-00076 Aalto, Finland.
Department of Applied Physics, School of Science, Aalto University, FIN-02150 Espoo, Finland.
Biomacromolecules. 2020 May 11;21(5):1875-1885. doi: 10.1021/acs.biomac.9b01745. Epub 2020 Feb 11.
Three-dimensional (3D) printing has been an emerging technique to fabricate precise scaffolds for biomedical applications. Cellulose nanofibril (CNF) hydrogels have attracted considerable attention as a material for 3D printing because of their shear-thinning properties. Combining cellulose nanofibril hydrogels with alginate is an effective method to enable cross-linking of the printed scaffolds in the presence of Ca ions. In this work, spherical colloidal lignin particles (CLPs, also known as spherical lignin nanoparticles) were used to prepare CNF-alginate-CLP nanocomposite scaffolds. High-resolution images obtained by atomic force microscopy (AFM) showed that CLPs were homogeneously mixed with the CNF hydrogel. CLPs brought antioxidant properties to the CNF-alginate-CLP scaffolds in a concentration-dependent manner and increased the viscosity of the hydrogels at a low shear rate, which correspondingly provide better shape fidelity and printing resolution to the scaffolds. Interestingly, the CLPs did not affect the viscosity at high shear rates, showing that the shear thinning behavior typical for CNF hydrogels was retained, enabling easy printing. The CNF-alginate-CLP scaffolds demonstrated shape stability after printing, cross-linking, and storage in Dulbecco's phosphate buffer solution (DPBS +) containing Ca and Mg ions, up to 7 days. The 3D-printed scaffolds showed relative rehydration ratio values above 80% after freeze-drying, demonstrating a high water-retaining capability. Cell viability tests using hepatocellular carcinoma cell line HepG2 showed no negative effect of CLPs on cell proliferation. Fluorescence microscopy indicated that HepG2 cells grew not only on the surfaces but also inside the porous scaffolds. Overall, our results demonstrate that nanocomposite CNF-alginate-CLP scaffolds have high potential in soft-tissue engineering and regenerative-medicine applications.
三维(3D)打印技术是一种新兴的制造技术,用于制造生物医学应用的精确支架。纤维素纳米纤维(CNF)水凝胶因其剪切变稀特性而受到广泛关注,是 3D 打印的理想材料。将纤维素纳米纤维水凝胶与海藻酸钠结合是一种有效的方法,可以在存在 Ca 离子的情况下使打印支架交联。在这项工作中,使用球形胶体木质素颗粒(CLP,也称为球形木质素纳米颗粒)来制备 CNF-海藻酸钠-CLP 纳米复合材料支架。原子力显微镜(AFM)获得的高分辨率图像表明,CLP 均匀地混合在 CNF 水凝胶中。CLP 以浓度依赖的方式为 CNF-海藻酸钠-CLP 支架带来抗氧化性能,并在低剪切速率下增加水凝胶的粘度,从而相应地为支架提供更好的形状保真度和打印分辨率。有趣的是,CLP 不会影响高剪切速率下的粘度,表明 CNF 水凝胶的剪切稀化行为得以保留,从而实现了轻松打印。CNF-海藻酸钠-CLP 支架在打印、交联和在含有 Ca 和 Mg 离子的 Dulbecco 磷酸盐缓冲液(DPBS +)中储存后表现出形状稳定性,长达 7 天。3D 打印支架在冷冻干燥后表现出相对复水率值高于 80%,表明其具有高保水能力。使用肝癌细胞系 HepG2 进行的细胞活力测试表明,CLP 对细胞增殖没有负面影响。荧光显微镜表明,HepG2 细胞不仅在表面生长,而且在多孔支架内部生长。总的来说,我们的结果表明,纳米复合材料 CNF-海藻酸钠-CLP 支架在软组织工程和再生医学应用中具有很高的潜力。