Cui Ziqiang, Hu Yafeng, Wang Huaxiang
Tianjin Key Laboratory of Process Measurement and Control, School of Electrical and Information Engineering, Tianjin University, Tianjin 300072, China.
Rev Sci Instrum. 2020 Jan 1;91(1):015109. doi: 10.1063/1.5119850.
Electrical capacitance tomography (ECT) is a multiphase flow detection technology, which has the advantages of nonradioactive, noninvasive, and on-line visualization measurements. In ECT measurements, the digital phase sensitive demodulation (PSD) plays an important role in guaranteeing the accuracy of small capacitance measurements. Generally, the clamping circuit is implemented to protect the A/D converter. In the measuring circuit, a programmable gain amplifier is usually employed to expand the dynamic range of PSD. However, the measured signal may exceed the measurement range from time to time, which induces the signal clamping effect. In this case, the digital PSD will present large errors in the capacitance measurements. In consideration of the frequency spectrum characteristic of the clamped signal, two digital PSD methods have been proposed. The proposed methods have been implemented in a field programmable gate array based measurement system. The experimental results show that the proposed multisine PSD method could expand the dynamic range by a factor of 5, at a relatively low error, i.e., ≤2%.
