Darne Chinmay D, Alsanea Fahed, Robertson Daniel G, Guan Fada, Pan Tinsu, Grosshans David, Beddar Sam
Department of Radiation Physics, The University of Texas MD Anderson Cancer Center, Houston, TX 77030, USA.
The University of Texas MD Anderson UTHealth Graduate School of Biomedical Sciences, Houston, TX 77030, USA.
Biomed Phys Eng Express. 2019 Jul;5(4). doi: 10.1088/2057-1976/ab2e4a. Epub 2019 Jul 12.
With the expansion of proton radiotherapy for cancer treatments, it has become important to explore proton-based imaging technologies to increase the accuracy of proton treatment planning, alignment, and verification. The purpose of this study is to demonstrate the feasibility of using a volumetric liquid scintillator to generate proton radiographs at a clinically relevant energy (180 MeV) using an integrating detector approach. The volumetric scintillator detector is capable of capturing a wide distribution of residual proton beam energies from a single beam irradiation. It has the potential to reduce acquisition time and imaging dose compared to other proton radiography methods. The imaging system design is comprised of a volumetric (20 × 20 × 20 cm) organic liquid scintillator working as a residual-range detector and a charge-coupled device (CCD) placed along the beams'-eye-view for capturing radiographic projections. The scintillation light produced within the scintillator volume in response to a 3-dimensional distribution of residual proton beam energies is captured by the CCD as a 2-dimensional grayscale image. A light intensity-to-water equivalent thickness (WET) curve provided WET values based on measured light intensities. The imaging properties of the system, including its contrast, signal-to-noise ratio, and spatial resolution (0.19 line-pairs/mm) were determined. WET values for selected Gammex phantom inserts including solid water, acrylic, and cortical bone were calculated from the radiographs with a relative accuracy of -0.82%, 0.91%, and -2.43%, respectively. Image blurring introduced by system optics was accounted for, resulting in sharper image features. Finally, the system's ability to reconstruct proton CT images from radiographic projections was demonstrated using a filtered back-projection algorithm. The WET retrieved from the reconstructed CT slice was within 0.3% of the WET obtained from MC. In this work, the viability of a cumulative approach to proton imaging using a volumetric liquid scintillator detector and at a clinically-relevant energy was demonstrated.
随着质子放射疗法在癌症治疗中的应用不断扩大,探索基于质子的成像技术以提高质子治疗计划、定位和验证的准确性变得至关重要。本研究的目的是证明使用体积液体闪烁体通过积分探测器方法在临床相关能量(180 MeV)下生成质子射线照片的可行性。体积闪烁体探测器能够捕获单次束流照射后残余质子束能量的广泛分布。与其他质子射线照相方法相比,它有可能减少采集时间和成像剂量。成像系统设计包括一个作为残余射程探测器的体积为(20×20×20 cm)的有机液体闪烁体,以及一个沿束流视向放置的用于捕获射线照相投影的电荷耦合器件(CCD)。闪烁体内因残余质子束能量的三维分布而产生的闪烁光被CCD捕获为二维灰度图像。光强度与水等效厚度(WET)曲线根据测量的光强度提供WET值。确定了该系统的成像特性,包括对比度、信噪比和空间分辨率(0.19线对/mm)。从射线照片计算了选定的Gammex体模插入物(包括固体水、丙烯酸和皮质骨)的WET值,相对准确度分别为-0.82%、0.91%和-2.43%。考虑了系统光学引入的图像模糊,从而得到更清晰的图像特征。最后,使用滤波反投影算法展示了该系统从射线照相投影重建质子CT图像的能力。从重建的CT切片中检索到的WET与蒙特卡罗模拟得到的WET相差在0.3%以内。在这项工作中,证明了使用体积液体闪烁体探测器并在临床相关能量下进行质子成像的累积方法的可行性。