Qu Junling, Rastogi Prachi, Gréboval Charlie, Livache Clément, Dufour Marion, Chu Audrey, Chee Sang-Soo, Ramade Julien, Xu Xiang Zhen, Ithurria Sandrine, Lhuillier Emmanuel
Sorbonne Université, CNRS, Institut des NanoSciences de Paris, INSP, F-75005 Paris, France.
Laboratoire de Physique et d'Etude des Matériaux, ESPCI-Paris, PSL Research University, Sorbonne Université Univ Paris 06, CNRS UMR 8213, 10 rue Vauquelin 75005 Paris, France.
ACS Appl Mater Interfaces. 2020 May 13;12(19):22058-22065. doi: 10.1021/acsami.0c05264. Epub 2020 Apr 29.
Now that colloidal nanocrystals (NCs) have been integrated as green and red sources for liquid crystal displays, the next challenge for quantum dots is their use in electrically driven light-emitting diodes (LEDs). Among various colloidal NCs, nanoplatelets (NPLs) have appeared as promising candidates for light-emitting devices because their two-dimensional shape allows a narrow luminescence spectrum, directional emission, and high light extraction. To reach high quantum efficiency, it is critical to grow core/shell structures. High temperature growth of the shells seems to be a better strategy than previously reported low-temperature approaches to obtain bright NPLs. Here, we synthesize CdSe/CdZnS core/shell NPLs whose shell alloy content is tuned to optimize the charge injection in the LED structure. The obtained LED has exceptionally low turn-on voltage, long-term stability (>3100 h at 100 cd m), external quantum efficiency above 5%, and luminance up to 35,000 cd m. We study the low-temperature performance of the LED and find that there is a delay of droop in terms of current density as temperature decreases. In the last part of the paper, we design a large LED (56 mm emitting area) and test its potential for LiFi-like communication. In such an approach, the LED is not only a lightning source but also used to transmit a communication signal to a PbS quantum dot solar cell used as a broadband photodetector. Operating conditions compatible with both lighting and information transfer have been identified. This work paves the way toward an all NC-based communication setup.
既然胶体纳米晶体(NCs)已被用作液晶显示器的绿色和红色光源,量子点面临的下一个挑战是将其应用于电驱动发光二极管(LED)。在各种胶体NCs中,纳米片(NPLs)已成为发光器件的有前途的候选材料,因为其二维形状允许窄的发光光谱、定向发射和高光提取效率。为了实现高量子效率,生长核/壳结构至关重要。与之前报道的低温方法相比,高温生长壳层似乎是获得明亮NPLs的更好策略。在这里,我们合成了CdSe/CdZnS核/壳NPLs,其壳层合金含量经过调整以优化LED结构中的电荷注入。所获得的LED具有极低的开启电压、长期稳定性(在100 cd m下超过3100小时)、高于5%的外量子效率以及高达35,000 cd m的亮度。我们研究了该LED的低温性能,发现随着温度降低,电流密度方面的效率下降存在延迟。在论文的最后一部分,我们设计了一个大尺寸LED(发射面积为56 mm)并测试其在类LiFi通信中的潜力。在这种方法中,LED不仅是一个光源,还用于将通信信号传输到用作宽带光电探测器的PbS量子点太阳能电池。已经确定了与照明和信息传输兼容的工作条件。这项工作为全基于NCs的通信设置铺平了道路。