Suppr超能文献

固定在多孔微球上的高效多酶用于从淀粉生产肌醇

Efficient Multi-Enzymes Immobilized on Porous Microspheres for Producing Inositol From Starch.

作者信息

Han Pingping, Zhou Xigui, You Chun

机构信息

Tianjin Institute of Industrial Biotechnology, Chinese Academy of Sciences, Tianjin, China.

University of Chinese Academy of Sciences, Beijing, China.

出版信息

Front Bioeng Biotechnol. 2020 May 5;8:380. doi: 10.3389/fbioe.2020.00380. eCollection 2020.

Abstract

synthetic enzymatic biosystem is considered to be the next generation of biomanufacturing platform. This biosystem contains multiple enzymes for the implementation of complicated biotransformatiom. However, the hard-to-reuse and instability of multiple enzymes limit the utilization of this biosystem in industrial process. Multi-enzyme immobilization might be a feasible alternative to address these problems. Herein, porous microspheres are used as carriers to co-immobilize multiple enzymes for producing inositol from starch. At first, all the enzymes (i.e., α-glucan phosphorylase aGP, phosphoglucose mutase PGM, inositol 1-phosphate synthase IPS, and inositol monophosphatase IMP) for converting starch to inositol were immobilized on porous microspheres individually to check the effect of immobilization, then all the enzymes are co-immobilized on porous microspheres. Compared to reaction system containing all the individual immobilized enzymes, the reaction system containing the co-immobilized enzymes exhibit ∼3.5 fold of reaction rate on producing inositol from starch. This reaction rate is comparable to that by free enzyme mixture. And the co-immobilized multi-enzyme system show higher thermal stability and recovery stability than free enzyme mixture. After 7 batches, the immobilized enzymes retain 45.6% relative yield, while the free enzyme mixture only retain 13.3% relative yield after 3 batches. Co-immobilization of multiple enzymes on porous microspheres for biomanufacturing would shed light on the application of synthetic enzymatic biosystem in industrial scale.

摘要

合成酶生物系统被认为是下一代生物制造平台。该生物系统包含多种酶以实现复杂的生物转化。然而,多种酶难以重复使用和稳定性差限制了该生物系统在工业过程中的应用。多酶固定化可能是解决这些问题的一种可行替代方法。在此,多孔微球被用作载体来共固定多种酶以从淀粉生产肌醇。首先,将所有用于将淀粉转化为肌醇的酶(即α-葡聚糖磷酸化酶aGP、磷酸葡萄糖变位酶PGM、肌醇1-磷酸合酶IPS和肌醇单磷酸酶IMP)分别固定在多孔微球上以检查固定化效果,然后将所有酶共固定在多孔微球上。与包含所有单独固定化酶的反应体系相比,包含共固定化酶的反应体系从淀粉生产肌醇时的反应速率提高了约3.5倍。该反应速率与游离酶混合物相当。并且共固定化多酶系统比游离酶混合物表现出更高的热稳定性和回收稳定性。7批次后,固定化酶保留45.6%的相对产率,而游离酶混合物在3批次后仅保留13.3%的相对产率。在多孔微球上共固定多种酶用于生物制造将为合成酶生物系统在工业规模上的应用提供启示。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验