Department of Electrical Engineering and Automation, School of Electrical Engineering, Aalto University, Espoo, Finland.
Phys Chem Chem Phys. 2020 Aug 7;22(29):16630-16640. doi: 10.1039/d0cp02251a. Epub 2020 Jul 15.
Biofouling imposes a significant threat for sensing probes used in vivo. Antifouling strategies commonly utilize a protective layer on top of the electrode but this may compromise performance of the electrode. Here, we investigated the effect of surface topography and chemistry on fouling without additional protective layers. We have utilized two different carbon materials; tetrahedral amorphous carbon (ta-C) and SU-8 based pyrolytic carbon (PyC) in their typical smooth thin film structure as well as with a nanopillar topography templated from black silicon. The near edge X-ray absorption fine structure (NEXAFS) spectrum revealed striking differences in chemical functionalities of the surfaces. PyC contained equal amounts of ketone, hydroxyl and ether/epoxide groups, while ta-C contained significant amounts of carbonyl groups. Overall, oxygen functionalities were significantly increased on nanograss surfaces compared to the flat counterparts. Neither bovine serum albumin (BSA) or fetal bovine serum (FBS) fouling caused major effects on electron transfer kinetics of outer sphere redox (OSR) probe Ru(NH) on any of the materials. In contrast, negatively charged OSR probe IrCl kinetics were clearly affected by fouling, possibly due to the electrostatic repulsion between redox species and the anionically-charged proteins adsorbed on the electrode and/or stronger interaction of the proteins and positively charged surface. The OSR probe kinetics were less affected by fouling on PyC, probably due to conformational changes of proteins on the surface. Dopamine (DA) was tested as an inner sphere redox (ISR) probe and as expected, the kinetics were heavily dependent on the material; PyC had very fast electron transfer kinetics, while ta-C had sluggish kinetics. DA electron transfer kinetics were heavily affected on all surfaces by fouling (ΔE increase 30-451%). The effect was stronger on PyC, possibly due to the more strongly adhered protein layer limiting the access of the probe to the inner sphere.
生物污垢对体内使用的传感探头构成重大威胁。通常,采用在电极上涂覆保护层的防污策略,但这可能会影响电极的性能。在这里,我们在不使用额外保护层的情况下,研究了表面形貌和化学性质对污垢的影响。我们使用了两种不同的碳材料;四面体非晶碳 (ta-C) 和基于 SU-8 的热解碳 (PyC),它们具有典型的光滑薄膜结构,以及由黑硅模板化的纳米柱形貌。近边 X 射线吸收精细结构 (NEXAFS) 光谱显示出表面化学官能团的显著差异。PyC 含有等量的酮、羟基和醚/环氧化物基团,而 ta-C 含有大量的羰基基团。总的来说,与平面相比,纳米草表面的氧官能团显著增加。牛血清白蛋白 (BSA) 或胎牛血清 (FBS) 污垢都没有对任何材料的外层电子转移动力学 (OSR) 探针 Ru(NH)产生重大影响。相比之下,带负电荷的 OSR 探针 IrCl 的动力学明显受到污垢的影响,这可能是由于氧化还原物种与吸附在电极上的带负电荷的蛋白质之间的静电排斥以及蛋白质与带正电荷的表面之间的更强相互作用。由于蛋白质在表面上的构象变化,OSR 探针的动力学受污垢的影响较小。多巴胺 (DA) 被用作内层电子转移 (ISR) 探针,并且正如预期的那样,动力学严重依赖于材料;PyC 具有非常快的电子转移动力学,而 ta-C 具有缓慢的动力学。在所有表面上,DA 的电子转移动力学都受到污垢的严重影响(ΔE 增加 30-451%)。在 PyC 上的影响更强,这可能是由于更牢固地粘附的蛋白质层限制了探针进入内层。